Nilfisk-ALTO 30CA COMPACT I Operating instructions Spray handle accessories, Starting procedure

Page 8

Operating instructions

4.Spray handle - accessories

1

Rinse the nipple before attaching the spray lance.

2

Pull the gray part of the spray handle (1) forward.

Insert the nipple (2) of the spray lance or accessory in the quick coupling and release #1. Tug on the spray lance or accessory to ensure it’s tight before starting the machine.

5.Detergent metering unit

Only use suitable detergents.

Use of aggressive detergents may damage the equipment and affect the environment.

Flush with water after use. IMPORTANT: Always set the injector to „0“ when not using detergents.

Detergents are added under low pressure through the built-in metering unit (1). The pickup hose and screen (3) of the metering unit is stored near the container support (2). Some container s can be hung on the support by the handle. Insert the pickup hose with filter into the bottle or the container. Metering is infinitely adjustable from 0-5%. Select the required concentration by turning the knob (3) counter-clockwise, until the desired setting is aligned with the arrow. When finished with the detergent system, flush it with water (in place of detergent), at setting ‘5’ for approximately 1 minute. Return the knob to position 0.

3.2 Starting procedure

Turn on the water.

Vent the machine.

Turn the start/stop knob (1) to position I.

Turn on the water supply and squeeze the trigger on the spray handle with the spray lance set at low pres- sure (or without a spray lance attached). Let the water run until all air has escaped from the supply hose, pump, and high pressure hose (a hissing sound will be heard until the air is gone).

During start-up, pump pressure may be irregular if air is left in the system. After a short time in operation the air will escape from the system, and the pressure will normalize.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 30CA Compact Page Contents DescriptionTechnical data Instructions for use Safety precautions and warningsType/Model P478 30CA Compact I Instructions for use, and 3.0 Operating instructionsStartup Safety precautions and warningsUnpacking Operation Ground Fault Circuit Interrupter ProtectionSafety devices on the machine Power connection Operating instructionsConnections High pressure hose Water connectionDetergent metering unit Operating instructions Spray handle accessoriesStarting procedure End of operation Operating instructions OperationSpray lance regulating pressure Transport instructions Storage frost protectionTypical applications Working pressureDetergents Operating suggestionsMaintenance Cleaning inlet water screenCleaning the cabinet air vents Self-primingTroubleshooting and correction Fault Possible Cause Remedies Motor wont startLimited Warranty

30CA COMPACT I specifications

The Nilfisk-ALTO 30CA COMPACT I is a powerful yet compact cleaning solution ideal for a wide range of applications. Renowned for its robust design and user-friendly features, this machine is perfect for both professional and industrial use, making it an essential addition to any cleaning fleet.

One of the standout features of the 30CA COMPACT I is its compact size, which allows for easy maneuverability and storage without sacrificing performance. This machine is designed to reach tight spaces that larger machines simply cannot access. Its lightweight construction also makes it easy to transport, facilitating ease of use in various locations.

Equipped with advanced motor technology, the 30CA COMPACT I delivers exceptional suction power and cleaning efficiency. The high-performance vacuum motor ensures effective dust and dirt removal, providing operators with impressive results in a short amount of time. This powerful system is matched with a robust filtration setup, which helps to maintain air quality by capturing fine dust particles and allergens, making it a great choice for environments that require high cleanliness standards.

The Nilfisk-ALTO 30CA COMPACT I features an ergonomic design that enhances user comfort and reduces fatigue during extended cleaning sessions. The handle is adjustable, allowing users to set it to their preferred height and grip, promoting better posture and efficiency while working. The large wheels ensure smooth movement across various surfaces, eliminating the strain often associated with heavy cleaning tasks.

Another key characteristic of this model is its versatility. The Nilfisk-ALTO 30CA COMPACT I can be equipped with a variety of attachments and accessories, allowing it to tackle different cleaning challenges effectively. Whether it's cleaning carpets, hard floors, or upholstery, the machine adapts to the task at hand, delivering excellent results in every situation.

Furthermore, the machine is built for durability and longevity, featuring high-quality materials that withstand the rigors of daily use. The design also incorporates easy access to components for maintenance and repairs, minimizing downtime and extending the overall lifespan of the equipment.

In summary, the Nilfisk-ALTO 30CA COMPACT I combines compactness and performance, making it an ideal choice for those looking for an efficient cleaning solution without the bulk. Its powerful motor, adjustable ergonomics, versatility with attachments, and durability make this machine stand out in the competitive field of cleaning equipment. Whether used in commercial spaces, offices, or homes, the 30CA COMPACT I is designed to meet diverse cleaning needs effectively.
Top Page Image Contents