Telex SS-1002 technical manual Specifications

Page 20

Specifications

General

Power Requirements

Phantom Power: +24VDC nominal, 75mA

Local Power: +12 to +15VDC, 500mA Dimensions

See Dimensions Drawings (Figure 11 on page 19) Environmental Requirements

Storage:

-20° C to 80° C; 0% to 95% RH, non-condensing

Operating:

-15° C to 60° C; 0% to 95% RH, non-condensing

Dynamic-mic Headset/Handset

Microphones

50 to 200 Ohms, dynamic (balanced or unbalanced)

Headphones

150 to 600 Ohm, monaural

Connector Type: XLR-4M

Pin 1 - Microphone Low

Pin 2 - Microphone High

Pin 3 - Headphone High

Pin 4 - Headphone Low

Panel Microphone

Built-in Microphone

2.2k Ohms, electret (44mV nominal), Omnidirectional

Gooseneck Microphone

Connector Type: 1/4” Threaded TRS, 5k Ohms, electret (44mV nominal)

Tip

Microphone High (+12VDC)

Ring

Common

Sleeve

Common

Compatible with MCP-90 Series Microphones

Intercom Channels, Balanced Mode (SW1 set to BAL position)

Output Level

1VRMS nominal

Input Impedance

300Ohms

Bridging Impedance greater than 5k Ohms

Sidetone

20dB adjustable range Call Signaling

Send

20kHz ±100Hz, 0.5VRMS ±10% Receive

20kHz ±800Hz, 100mVRMS Mic Kill Detect Frequency

24kHz ±800Hz, 100mVRMS Noise Contribution

less than -70dB Common Mode Rejection Ratio

greater than 50dB

Connector Type:

Six-position push type terminal block Pin 1 - Audio and DC Common

Pin 2 - Local power (+12 to +15VDC), if needed Pin 3 - Intercom CH1 audio low and +24VDC power Pin 4 - Intercom CH1 audio high and +24VDC power Pin 5 - Intercom CH2 audio low and +24VDC power Pin 6 - Intercom CH2 audio high and +24VDC power

Intercom Channels, Unbalanced Mode (SW1 set to UNBAL position)

Output Level

0.70VRMS ±10%

Input Impedance

200Ohms

Bridging Impedance greater than 10k ohms

Sidetone

-40dB, 20dB adjustable range

Connector Type:

Six-position push type terminal block

Pin 1 - Ground

Pin 2 - +30VDC

Pin 3 - CH B Intercom

Pin 4 - CH A Intercom

Pin 5 - NC

Pin 6 - NC

Speaker Output Power

4W max @ 8 Ohms

18

Image 20
Contents Model SS-2002 RM Technical ManualFCC Statement Shipping to the ManufacturerContents Page Description IntroductionIntroduction Features Sidetone Trimmers Balanced/Unbalanced Selector Switch SS-2002RM Features Installation Configuration Pre-checkDIP Switches To access the internal controls, do the followingCall Signal Compatibility Mic Kill ReceiveIncoming Call Beep Microphone TypeBalanced/Unbalanced Switch Headset Connector NotesPanel Mic Connector Notes Speaker Beep for Incoming CallDescription of Phantom-Powered Connection Intercom Channel ConnectionsDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Audiocom cable wiring diagrams Operation and Specifications Power UpSidetone Adjustment To power up the SS1002/2002, do the followingChannel Select SS-2002 & SS-2002RM Only Headset/Headphone/Speaker/Microphone SelectionReceiving Calls Activate talk and listenCalling an Intercom Channel Specifications Dimensions DimensionsPage Installing the Box to the Faceplate SS1002/2002 Supplemental InformationSS2002 Wire Connection for use in Audiocom System
Related manuals
Manual 18 pages 63.48 Kb

SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.