Telex SS-1002 technical manual Installation, Configuration Pre-check, DIP Switches

Page 9

CHAPTER 2

Installation

Configuration Pre-check

Before making connections, read the following configuration notes. Make sure all internal controls are properly set for your intended usage.

To access the internal controls, do the following:

1.Remove the four (4) screws on the front panel that secure the intercom station faceplate to the mounting box.

2.Pull the faceplate out for all versions (except the RM version).

To access the internal controls for the RM version, do the following:

1.Remove the 10 screws securing the cover on the box.

2.Lift the cover off.

DIP Switches

TABLE 1. DIP Switch descriptions and factory default settings

Switch

Description

Settings

Default

Number

Open = OFF; Closed = ON

Settings

 

 

 

 

 

1

Mic Kill Receive

Closed: Disabled, No Mic Kill

Open

Open: Enabled, Mic Kill Active

 

 

 

 

 

 

 

2

Call Signal Method

Closed: DC (SW1 set to UNBAL)

Open

Open: Audiocom (SW1 set to BAL)

 

 

 

 

 

 

 

3

Incoming Call Beep

Closed: Disabled

Open

Open: Enabled

 

 

 

 

 

 

 

4

Microphone Type

Closed: Unbalanced

Open

Open: Balanced

 

 

 

 

 

 

 

5

Speaker Beep for Incoming

Closed: Enabled (DIP switch 3 must be set to Open)

Open

Call

Open: Disabled

 

 

 

 

 

 

6

Not Used

Not Defined

Open

 

 

 

 

7

Not Used

Not Defined

Open

 

 

 

 

8

Not Used

Not Defined

Open

 

 

 

 

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Technical Manual Model SS-2002 RMShipping to the Manufacturer FCC StatementContents Page Introduction IntroductionDescription Features Sidetone Trimmers Balanced/Unbalanced Selector Switch SS-2002RM Features Configuration Pre-check InstallationDIP Switches To access the internal controls, do the followingMic Kill Receive Call Signal CompatibilityIncoming Call Beep Microphone TypeHeadset Connector Notes Balanced/Unbalanced SwitchPanel Mic Connector Notes Speaker Beep for Incoming CallIntercom Channel Connections Description of Phantom-Powered ConnectionDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Audiocom cable wiring diagrams Power Up Operation and SpecificationsSidetone Adjustment To power up the SS1002/2002, do the followingHeadset/Headphone/Speaker/Microphone Selection Channel Select SS-2002 & SS-2002RM OnlyReceiving Calls Activate talk and listenCalling an Intercom Channel Specifications Dimensions DimensionsPage SS1002/2002 Supplemental Information Installing the Box to the FaceplateSS2002 Wire Connection for use in Audiocom System
Related manuals
Manual 18 pages 63.48 Kb

SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.
Top Page Image Contents