Telex SS-1002 SS1002/2002 Supplemental Information, Installing the Box to the Faceplate

Page 23

APPENDIX A

SS1002/2002 Supplemental Information

Installing the Box to the Faceplate

General Instructions

If you ordered SS1002/2002 boxes and faceplates separately, use these instructions to assemble the speaker stations. Once you have assembled the stations, refer to the User Manual for all installation and operation information.

Step 1. Connecting the Wires from the Box to the Faceplate

Use the appropriate pin connections, see Table X, to connect the wires from the XLR audio connector on the box to the terminal strip on the circuit board. (Or, in the case of the U box, connect wires from the intercom system to the terminal strip.) To insert a wire into the terminal strip, push back the green lever on the top of the terminal, as shown, then insert the wire and release the lever.

TABLE 2. SS1002 wire connections for use in Audiocom System

XLR Connector on Box

Terminal Strip on Circuit Board

Description

 

 

 

Pin 1

TB1-1

DC Common

 

 

 

Pin 2

TB1-3

Audiocom Channel audio low and +24VDC phantom

power

 

 

 

 

 

Pin 3

TB1-4

Audiocom Channel audio high and +24VDC phantom

power

 

 

 

 

 

TABLE 3. SS1002 wire connections for use in Clear-com System

XLR Connector on Box

Terminal Strip on Circuit Board

Description

Pin 1

TB1-1

Common

 

 

 

Pin 2

TB1-3

Clear-com power input

 

 

 

Pin 3

TB1-4

Clear-com audio / call signal

 

 

 

21

Image 23
Contents Technical Manual Model SS-2002 RMShipping to the Manufacturer FCC StatementContents Page Description IntroductionIntroduction Features Sidetone Trimmers Balanced/Unbalanced Selector Switch SS-2002RM Features To access the internal controls, do the following InstallationConfiguration Pre-check DIP SwitchesMicrophone Type Call Signal CompatibilityMic Kill Receive Incoming Call BeepSpeaker Beep for Incoming Call Balanced/Unbalanced SwitchHeadset Connector Notes Panel Mic Connector NotesIntercom Channel Connections Description of Phantom-Powered ConnectionDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Audiocom cable wiring diagrams To power up the SS1002/2002, do the following Operation and SpecificationsPower Up Sidetone AdjustmentActivate talk and listen Channel Select SS-2002 & SS-2002RM OnlyHeadset/Headphone/Speaker/Microphone Selection Receiving CallsCalling an Intercom Channel Specifications Dimensions DimensionsPage SS1002/2002 Supplemental Information Installing the Box to the FaceplateSS2002 Wire Connection for use in Audiocom System
Related manuals
Manual 18 pages 63.48 Kb

SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.