Starting, Procedure | DeVillbiss Air Power Company A16617, XR2625

DeVillbiss Air Power Company A16617, XR2625 Starting, Up spilled fuel before starting, Procedure

to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.

To reduce the risk of injury, read the pressure washer instruction manual and the engine instruction manual before

starting pressure washer.

Risk of fluid injection and laceration. When using the high-pressure setting, DO NOT allow the high-pressure spray to come in contact

with unprotected skin, eyes, or with any pets or animals. Serious injury will occur.

•Your washer operates at ﬂuid pressures and velocities high enough to penetrate human and animal ﬂesh, which could result in amputation or other serious injury. Leaks caused by loose ﬁttings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

Risk of Fire, Asphyxiation and Burn. NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

•NEVER ﬁll fuel tank completely. Fill tank to 1/2" below bottom of ﬁller neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

•NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

•DO NOT let hoses come in contact with very hot engine mufﬂer during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

Risk of property damage. NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

•DO NOT use hot water, use cold water only.

•NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

•DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-800-888-2468 to speak to a service representative for further instructions.

STARTING

Prior to starting, refer to your engine manual for proper starting procedure.

1. In a well ventilated outdoor area

add fresh, high quality, unleaded

3.Connect the water hose to the water source. Turn the water source on to remove all air from the hose. When a steady stream of water is present, turn the water source off.

gasoline with a pump octane rating

of 86 or higher. Do not overﬁll. Wipe

up spilled fuel before starting the

engine. Refer to Engine Owners

Manual for correct procedure.

2. Check engine oil level. See

Engine Owners Manual for correct

procedure.

4.Verify the filter screen is in water inlet of pump. NOTE: Cone side faces out.

Filter Screen

13- ENG

A16617

A16617, XR2625 specifications

The DeVillbiss Air Power Company has established itself as a reputable name in the air power industry, and its model A16617, XR2625 exemplifies the innovation and reliability that the brand is known for. This air compressor combines advanced technology with user-friendly features, making it a popular choice among both professionals and DIY enthusiasts.

One of the key features of the A16617 model is its powerful motor. The XR2625 is equipped with a robust electric motor that delivers consistent power, ensuring that users can operate various tools and equipment efficiently. The design of the motor provides high-performance output while reducing energy consumption, making it an eco-friendly choice for users concerned with energy efficiency.

The compressor boasts a unique oil-free pump mechanism that eliminates the need for regular oil changes and maintenance. This not only lowers the cost of ownership but also enhances operational productivity, allowing users to focus on their tasks without the hassle of upkeep. The oil-free design also contributes to cleaner air output, making it an ideal choice for tasks that require clean air, such as painting or working with delicate instruments.

Another notable characteristic of the A16617, XR2625 is its impressive tank capacity. With a sizable air storage tank, this compressor is capable of delivering a continuous air supply, making it suitable for extended use in various applications. The quick recovery time ensures that users can maintain optimal air pressure, further improving overall efficiency.

The versatility of the DeVillbiss A16617 is highlighted by its multiple outlet options, allowing users to connect various tools simultaneously. Whether it's for inflating tires, powering pneumatic tools, or carrying out detailed spray painting, this model meets diverse air supply needs.

Furthermore, the unit is designed with user convenience in mind. It features a lightweight and portable design complete with ergonomic handles, making it easy to transport and store. The intuitive control panel enhances usability, providing straightforward adjustments for air pressure and other settings.

In summary, the DeVillbiss Air Power Company A16617, XR2625 stands out for its powerful motor, oil-free pump, large tank capacity, versatility, and user-friendly design. These features make it an essential tool for anyone looking to get the job done effectively and efficiently. Whether in a professional workshop or a home garage, this air compressor represents a reliable investment in air power technology.