Briggs & Stratton 020238-0 Pressure Washer Rinsing, Cleaning Detergent Siphoning Tube

Page 13

SpeedClean™ 2000 PSI Pressure Washer

4.Slide adjustable nozzle forward to low pressure mode. Detergent cannot be applied with nozzle in high pressure position.

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Start engine.

6.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

7.Allow detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. DO NOT allow detergent to dry on (prevents streaking).

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

Pressure Washer Rinsing

For Rinsing:

1.Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear.

NOTE: You can also stop detergent from flowing by simply removing chemical injection hose from bottle.

2.Keep the spray gun a safe distance from the area you plan to spray.

WARNING

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury if gun kicks back.

3.Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

4.Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Cleaning Detergent Siphoning Tube

If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine.

1.Place detergent siphoning tube/filter in a bucket full of clean water.

2.Engage trigger lock on spray gun.

3.Slide adjustable nozzle forward to low pressure position.

4.Flush for 1-2 minutes.

5.Shut off engine.

6.ALWAYS point gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F.The system engages to cool the pump by

discharging the warm water onto the ground.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 2000PSI Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment Unintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Know Your Pressure Washer Carton Contents AssemblyPreparing Pressure Washer for USE Unpack the Pressure WasherRefer to and install the wheel kit as follows Install Wheel KitAdd Engine Oil and Fuel Connect Hose and Water Supply to Pump Checklist Before Starting EngineHow to Start Your Pressure Washer HOW to USE Your Pressure WasherPressure Washer Location Pressure Washer ClearanceRecommended Starting Position How to Stop Your Pressure WasherApplying Detergent with the Adjustable Nozzle How to Use the Adjustable NozzleUsage Tips To apply detergent, follow these stepsPressure Washer Rinsing Cleaning Detergent Siphoning TubeAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Ring Maintenance Nozzle MaintenancePump Oil Maintenance OrificePreparing the Unit for Storage Engine MaintenanceStoring the Engine Protecting the PumpProblem Cause Correction TroubleshootingSpeedClean 2000 PSI Pressure Washer Limited Warranty Descripción DEL Equipo Tabla DE ContenidosReglas DE Seguridad AdvertenciaCuando Añada Combustible Cuando Pruebe LA Bujía DEL Motor Precaución Filtro y Tubo para Recolección de Detergente no Conozca SU Maquina Lavadora a PresionTapa del Depósito del Aceite Llene el motor con aceite Preparando EL Lavador a Presión Para SU USO MontajeConecte la Manguera y el Suministro de Agua a la Bomba Agregar Aceite al Motor y CombustibleLista de Revision Previa al Arranque del Motor Ubicación del Lavadora a Presión Cómo Usar SU Máquina Lavadora a PresiónCómo Darle Arranque a su Máquina Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónFigura 24 Posición Recomendada para el Arranque Cómo Detener su Máquina Lavadora a PresiónAplicación del Detergente Usando la Boquilla Ajustable Cómo Usar la Boquilla AjustableUso Inclina Para aplicar el detergente, siga los siguientes pasosLimpiando el Tubo Enjuage de la Máquina Lavadora a PresiónSistema de Enfriamiento Automático Alivio Térmico Para EnjuageRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Mantenimiento DEL MotorMantenimiento de los Anillos O BoquillaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Notas Garantía Limitada

020238-0 specifications

The Briggs & Stratton 020238-0 is a powerful and reliable generator that is designed to meet the needs of homeowners and professionals alike. This model stands out for its durability, efficiency, and advanced technology. Whether for outdoor activities, emergencies, or job sites, this generator is equipped to deliver consistent power when it is most needed.

One of the key features of the Briggs & Stratton 020238-0 is its robust engine. Powered by a reliable Briggs & Stratton engine, this generator provides dependable starting and performance. With a high-efficiency design, the engine ensures optimal fuel consumption while delivering ample power output. The generator can produce up to 5,000 running watts and 6,250 starting watts, making it suitable for running essential appliances and tools during power outages or outdoor events.

Another notable characteristic is the generator's compact and portable design. It features built-in wheels and a foldable handle, allowing for easy transport and storage. This portability makes the generator an excellent choice for camping, tailgating, or construction sites where power is required away from conventional power sources.

The Briggs & Stratton 020238-0 incorporates advanced safety features, including low-oil shutdown, which protects the engine from damage when oil levels are too low. Additionally, the generator is equipped with circuit breakers to prevent overloads and ensure safe operation. The user-friendly control panel features multiple outlets, including 120V and 120/240V options, allowing for versatile connectivity for various devices.

The generator also boasts a noise-reducing design, ensuring quieter operation compared to many other models in its class. This feature is particularly advantageous in residential areas or during nighttime use, where noise can be a concern.

In summary, the Briggs & Stratton 020238-0 is a well-rounded generator that combines power, portability, and safety. With its durable construction and advanced technologies, it serves as an invaluable tool for anyone in need of reliable electrical power. Whether for emergency backup or recreational use, this generator provides peace of mind and exceptional performance, making it an excellent investment for both casual users and professionals seeking a dependable power solution.
Top Page Image Contents