Briggs & Stratton 020238-0 Engine Maintenance, Preparing the Unit for Storage, Storing the Engine

Page 16

SpeedClean™ 2000 PSI Pressure Washer

ENGINE MAINTENANCE

See the engine operator’s manual for instructions on how to properly maintain the engine.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

Used motor oil has been shown to cause skin cancer in certain laboratory animals.

Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube/filter by placing filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in forward position). Flush for one to two minutes.

2.Shut off engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Place the spray gun, nozzle extension and high pressure hose in the accessory storage bag.

4.Empty pump of all pumped liquids by pulling recoil handle about 6 times.This should remove most liquid in pump.

5.Use PumpSaver to prevent corrosion build up and freezing of pump.

6.Store unit in a clean, dry area.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

CAUTION

You must protect your unit from freezing temperatures.

Failure to do so will permanently damage your pump and render your unit inoperable.

Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

CAUTION

PumpSaver will drip from pump after treatment and will stain wood and concrete.

• Protect surfaces from dripping PumpSaver.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine operator’s manual for instructions on how to properly prepare the engine for storage.

16

Image 16
Contents 2000PSI Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment Unintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Know Your Pressure Washer Assembly Carton ContentsPreparing Pressure Washer for USE Unpack the Pressure WasherRefer to and install the wheel kit as follows Install Wheel KitAdd Engine Oil and Fuel Checklist Before Starting Engine Connect Hose and Water Supply to PumpHOW to USE Your Pressure Washer How to Start Your Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer Recommended Starting PositionHow to Use the Adjustable Nozzle Applying Detergent with the Adjustable NozzleUsage Tips To apply detergent, follow these stepsCleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Ring MaintenancePump Oil Maintenance OrificeEngine Maintenance Preparing the Unit for StorageStoring the Engine Protecting the PumpTroubleshooting Problem Cause CorrectionSpeedClean 2000 PSI Pressure Washer Limited Warranty Tabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible Cuando Pruebe LA Bujía DEL Motor Precaución Filtro y Tubo para Recolección de Detergente no Conozca SU Maquina Lavadora a PresionTapa del Depósito del Aceite Llene el motor con aceite Montaje Preparando EL Lavador a Presión Para SU USOConecte la Manguera y el Suministro de Agua a la Bomba Agregar Aceite al Motor y CombustibleLista de Revision Previa al Arranque del Motor Cómo Usar SU Máquina Lavadora a Presión Ubicación del Lavadora a PresiónCómo Darle Arranque a su Máquina Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión Figura 24 Posición Recomendada para el ArranqueCómo Usar la Boquilla Ajustable Aplicación del Detergente Usando la Boquilla AjustableUso Inclina Para aplicar el detergente, siga los siguientes pasosEnjuage de la Máquina Lavadora a Presión Limpiando el TuboSistema de Enfriamiento Automático Alivio Térmico Para EnjuageRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento DEL Motor Mantenimiento de la BoquillaMantenimiento de los Anillos O BoquillaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Notas Garantía Limitada

020238-0 specifications

The Briggs & Stratton 020238-0 is a powerful and reliable generator that is designed to meet the needs of homeowners and professionals alike. This model stands out for its durability, efficiency, and advanced technology. Whether for outdoor activities, emergencies, or job sites, this generator is equipped to deliver consistent power when it is most needed.

One of the key features of the Briggs & Stratton 020238-0 is its robust engine. Powered by a reliable Briggs & Stratton engine, this generator provides dependable starting and performance. With a high-efficiency design, the engine ensures optimal fuel consumption while delivering ample power output. The generator can produce up to 5,000 running watts and 6,250 starting watts, making it suitable for running essential appliances and tools during power outages or outdoor events.

Another notable characteristic is the generator's compact and portable design. It features built-in wheels and a foldable handle, allowing for easy transport and storage. This portability makes the generator an excellent choice for camping, tailgating, or construction sites where power is required away from conventional power sources.

The Briggs & Stratton 020238-0 incorporates advanced safety features, including low-oil shutdown, which protects the engine from damage when oil levels are too low. Additionally, the generator is equipped with circuit breakers to prevent overloads and ensure safe operation. The user-friendly control panel features multiple outlets, including 120V and 120/240V options, allowing for versatile connectivity for various devices.

The generator also boasts a noise-reducing design, ensuring quieter operation compared to many other models in its class. This feature is particularly advantageous in residential areas or during nighttime use, where noise can be a concern.

In summary, the Briggs & Stratton 020238-0 is a well-rounded generator that combines power, portability, and safety. With its durable construction and advanced technologies, it serves as an invaluable tool for anyone in need of reliable electrical power. Whether for emergency backup or recreational use, this generator provides peace of mind and exceptional performance, making it an excellent investment for both casual users and professionals seeking a dependable power solution.