Briggs & Stratton 3500PSI Preparing the Unit for Storage, Storing the Engine Engine Maintenance

Page 13

Snapper 3500 PSI Pressure Washer

Figure 18 — Backflushing the Nozzle Extension

6.Reinstall the nozzle and in-line filter into the nozzle extension. Do Not overtighten the nozzle with the allen wrench.

7.Reconnect the nozzle extension to the spray gun.

8.Reconnect the water supply, turn on the water, and start the engine.

9.Test the pressure washer by operating with each of the Quick Connect nozzles.

O–Ring Maintenance

Through the normal operation of your pressure washer, o–rings, which keep the connections of the hoses and spray gun tight and leak–free, may become worn or damaged.

An O–Ring Maintenance Kit is provided with your pressure washer. It includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings. Note that you will not use all of the parts in the kit.

To remove a worn or damaged o–ring:

•Use a small flathead screwdriver to get underneath the o-ring and pry it off.

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove all hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of all pumped liquids by pulling the recoil handle about 6 times. This should remove most of the liquid in the pump.

4.Use PumpSaver to treat pump. This prevents freeze damage and lubricates pistons and seals.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

5.Store unit in a clean, dry area.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

CAUTION! Avoid prolonged or repeated skin contact with used motor oil. Used motor oil has been shown to cause skin cancer in certain laboratory animals. Thoroughly wash exposed areas with soap and water. KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 3500PSI Contact the Local Snapper Service CenterSafety Rules Table of ContentsEquipment Description High pressure spray may damage fragile items including glass High Pressure Outlet with Quick Connect To Know Your Pressure WasherNozzle Extension with Quick Connect Allows you to Remove Pressure Washer from Carton Carton ContentsWasher for USE Attach Handle to the Pressure WasherTo install the oil dipstick Install Oil Dipstick on Pump Add GasolineAdd Engine Oil Connect Hose and Water Supply to Pump Checklist Before Starting EngineDo Not use if How to Start Your Engine HOW to USE Your Pressure WasherHow to Use the Nozzles How to Stop Your Pressure WasherFollow these instructions to change nozzles Low PressureAutomatic Cool Down System Pressure Washer Rinsing Cleaning and Applying ChemicalTo apply detergent follow these steps General Maintenance Recommendations SpecificationsPressure Washer Maintenance Check Gun and Nozzle Extension Nozzle MaintenanceCheck In-Line Filter Purge Pump of Air ContaminantsRing Maintenance Storing the Engine Engine MaintenancePreparing the Unit for Storage To remove a worn or damaged o-ringSnapper 3500 PSI Pressure Washer Troubleshooting Exploded View Unit Qty Description Parts List UnitExploded View Pump Parts List Pump Exploded View Unloader Parts List Unloader Snapper 3500 PSI Pressure Washer Snapper 3500 PSI Pressure Washer Generac Portable Products, LLC Jefferson, Wisconsin U.S.A Snapper Owner Warranty Policy Effective October 1

3500PSI specifications

Briggs & Stratton, a reputable name in outdoor power equipment, has introduced the 3500PSI pressure washer, a powerful tool designed for demanding cleaning tasks. With its impressive 3500 PSI output, this pressure washer is capable of tackling tough jobs, making it an ideal choice for both homeowners and professionals.

One of the standout features of the Briggs & Stratton 3500PSI pressure washer is its powerful engine. Equipped with an OHV (Overhead Valve) engine, it provides reliable and efficient performance, ensuring that you can complete your cleaning tasks quickly and effectively. The engine is designed for easy starting and smooth operation, reducing the frustration often associated with gas-powered machines.

This pressure washer also features a heavy-duty steel frame, providing durability and stability during use. The construction ensures that the unit can withstand the rigors of regular use, whether you're cleaning driveways, patios, or vehicles. The sturdy design also includes large pneumatic tires, which allow for easy maneuverability across various terrains, making it convenient to transport and position the unit where it's needed most.

Equipped with an adjustable spray nozzle, the 3500PSI pressure washer allows users to customize the pressure output according to the specific cleaning task at hand. Whether you need a high-pressure jet for stubborn dirt and grime or a gentle spray for more delicate surfaces, this feature enhances versatility, ensuring optimal results across a range of applications.

Additionally, the pressure washer is designed with user-friendly features in mind. It includes an easy-to-access detergent tank, which facilitates the use of soaps and cleaners for enhanced cleaning power. The quick-connect nozzle system simplifies the process of switching between nozzles, allowing users to transition seamlessly during cleaning tasks.

For added safety, the Briggs & Stratton 3500PSI pressure washer includes various protective features such as a safety lock on the trigger and an automatic shut-off system. These technologies help prevent accidents and ensure the longevity of the equipment.

In summary, the Briggs & Stratton 3500PSI pressure washer combines power, durability, and user-friendly features to deliver an exceptional cleaning experience. With its robust engine, adjustable spray nozzle, and safety functionalities, it stands out as a reliable choice for anyone looking to invest in a high-performance pressure washer capable of tackling tough cleaning challenges.
Top Page Image Contents