Briggs & Stratton 3500PSI Remove Pressure Washer from Carton, Washer for USE, Carton Contents

Page 5

Snapper 3500 PSI Pressure Washer

IMPORTANT: Read entire owner’s manual before you PREPARING PRESSURE attempt to assemble or operate your new pressure washer.

REMOVE PRESSURE

WASHER FROM

CARTON

•Remove all accessories and parts bag included with pressure washer.

•Slice two corners at the end of carton from top to bottom so the panel can be folded down flat, then remove all packing material.

•Roll pressure washer out of carton.

Carton Contents

Items in the carton include:

•Main unit

•High pressure hose

•Handle

•Pump oil dipstick (hanging on pump)

•(2) bottles of engine oil

•Safety goggles

•Spray gun with quick connect fitting

•Nozzle extension with quick connect fitting

•Accessory bag (includes the following):

•Owner’s registration card

•Nozzle cleaning kit

•Bag containing 5 multi–colored quick connect nozzles

•O–Ring maintenance kit

•Owner’s manual

•Engine manual

•Handle hardware, including one carriage bolt, one “L” bolt and 2 plastic knobs

If any of the above parts are missing or damaged, contact the local Snapper service center.

WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, contact the local Snapper service center.

To prepare your pressure washer for operation, you will need to perform these tasks:

•Fill out and send in the registration card.

•Attach the handle to the main unit.

•Add oil to the engine.

•Add fuel to the fuel tank.

•Connect the high pressure hose to the spray gun and the pump.

•Connect the water supply to the pump.

•Connect nozzle extension to spray gun.

•Select and install desired nozzle.

Attach Handle to the Pressure Washer

•Place the handle onto the handle supports already connected to the main unit. Make sure the holes in the handle align with the holes on the handle supports. (Figure 1)

Figure 1 — Attach the Handle to the Base

Make sure the

 

 

Handle

holes on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

handle are

 

 

 

 

 

 

 

aligned with the

 

 

 

 

 

 

 

holes on the

 

 

Handle

 

 

 

 

handle supports

 

 

 

 

 

 

 

 

 

 

 

Supports

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

•Insert the carriage bolt through the hole on the left side of the handle (viewing from rear of unit) and attach the plastic knob (Figure 2). Tighten the knob by hand.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 3500PSI Contact the Local Snapper Service CenterEquipment Description Table of ContentsSafety Rules High pressure spray may damage fragile items including glass Nozzle Extension with Quick Connect Allows you to Know Your Pressure WasherHigh Pressure Outlet with Quick Connect To Remove Pressure Washer from Carton Carton ContentsWasher for USE Attach Handle to the Pressure WasherAdd Engine Oil Install Oil Dipstick on Pump Add GasolineTo install the oil dipstick Do Not use if Checklist Before Starting EngineConnect Hose and Water Supply to Pump How to Start Your Engine HOW to USE Your Pressure WasherHow to Use the Nozzles How to Stop Your Pressure WasherFollow these instructions to change nozzles Low PressureTo apply detergent follow these steps Cleaning and Applying ChemicalAutomatic Cool Down System Pressure Washer Rinsing Pressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Check Gun and Nozzle Extension Nozzle MaintenanceCheck In-Line Filter Purge Pump of Air ContaminantsRing Maintenance Storing the Engine Engine MaintenancePreparing the Unit for Storage To remove a worn or damaged o-ringSnapper 3500 PSI Pressure Washer Troubleshooting Exploded View Unit Qty Description Parts List UnitExploded View Pump Parts List Pump Exploded View Unloader Parts List Unloader Snapper 3500 PSI Pressure Washer Snapper 3500 PSI Pressure Washer Generac Portable Products, LLC Jefferson, Wisconsin U.S.A Snapper Owner Warranty Policy Effective October 1

3500PSI specifications

Briggs & Stratton, a reputable name in outdoor power equipment, has introduced the 3500PSI pressure washer, a powerful tool designed for demanding cleaning tasks. With its impressive 3500 PSI output, this pressure washer is capable of tackling tough jobs, making it an ideal choice for both homeowners and professionals.

One of the standout features of the Briggs & Stratton 3500PSI pressure washer is its powerful engine. Equipped with an OHV (Overhead Valve) engine, it provides reliable and efficient performance, ensuring that you can complete your cleaning tasks quickly and effectively. The engine is designed for easy starting and smooth operation, reducing the frustration often associated with gas-powered machines.

This pressure washer also features a heavy-duty steel frame, providing durability and stability during use. The construction ensures that the unit can withstand the rigors of regular use, whether you're cleaning driveways, patios, or vehicles. The sturdy design also includes large pneumatic tires, which allow for easy maneuverability across various terrains, making it convenient to transport and position the unit where it's needed most.

Equipped with an adjustable spray nozzle, the 3500PSI pressure washer allows users to customize the pressure output according to the specific cleaning task at hand. Whether you need a high-pressure jet for stubborn dirt and grime or a gentle spray for more delicate surfaces, this feature enhances versatility, ensuring optimal results across a range of applications.

Additionally, the pressure washer is designed with user-friendly features in mind. It includes an easy-to-access detergent tank, which facilitates the use of soaps and cleaners for enhanced cleaning power. The quick-connect nozzle system simplifies the process of switching between nozzles, allowing users to transition seamlessly during cleaning tasks.

For added safety, the Briggs & Stratton 3500PSI pressure washer includes various protective features such as a safety lock on the trigger and an automatic shut-off system. These technologies help prevent accidents and ensure the longevity of the equipment.

In summary, the Briggs & Stratton 3500PSI pressure washer combines power, durability, and user-friendly features to deliver an exceptional cleaning experience. With its robust engine, adjustable spray nozzle, and safety functionalities, it stands out as a reliable choice for anyone looking to invest in a high-performance pressure washer capable of tackling tough cleaning challenges.
Top Page Image Contents