Briggs & Stratton 3500PSI Connect Hose and Water Supply to Pump, Checklist Before Starting Engine

Page 7

Snapper 3500 PSI Pressure Washer

Connect Hose and Water Supply to Pump

IMPORTANT: You must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine. Starting engine without all hoses connected and water supplied will damage the pump.

•Uncoil high pressure hose and attach quick connect end of hose to the base of the spray gun (Figure 5). Pull down on the collar of the quick connect, slide onto the spray gun and let go of collar. Tug on hose to be sure of a tight connection.

Figure 5 — Connect High Pressure Hose to Spray Gun

Connect high pressure hose here.

•Similarly, attach the other end of the high pressure hose to the high pressure outlet on the pump (Figure 6). Pull down on the collar of the quick connect, slide onto the pump and let go of collar. Pull on hose to be sure of a tight connection.

Figure 6 — Connect High Pressure Hose to Pump

Connect high

pressure hose here

•Before you connect your garden hose to the water inlet, inspect the inlet screen (Figure 7). Clean the screen if it contains debris, replace if damaged. DO NOT RUN THE PRESSURE WASHER IF THE SCREEN IS DAMAGED.

Figure 7 — Connect the Garden Hose to Water Inlet

Inspect inlet screen,

Do Not use if

damaged, clean if

dirty.

•Run water through your garden hose for 30 seconds to clean out any debris. Turn off water.

IMPORTANT: Do Not siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

•Connect the garden hose to the water inlet. Tighten by hand (Figure 7).

CAUTION! There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve. Damage to pressure washer resulting from disregarding this warning will not be covered by the warranty.

•Turn ON the water.

•Squeeze the trigger on the spray gun until you have a steady stream of water. This purges the pump of air and impurities.

CAUTION! Before starting the pressure washer, be sure you are wearing adequate eye protection.

Checklist Before Starting Engine

Review the unit’s assembly to confirm you have performed all of the following:

•Make sure the handle is secure.

•Check for properly tightened hose connections.

•Check to make sure that there are no kinks, cuts, or damage to the high pressure hose.

•Check that oil has been added to the proper level in the engine crankcase.

•Add the proper gasoline to fuel tank.

•Provide a proper water supply (not to exceed 100°F) at a minimum flow of 3.9 gallons per minute.

•Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using the pressure washer.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 3500PSI Contact the Local Snapper Service CenterSafety Rules Table of ContentsEquipment Description High pressure spray may damage fragile items including glass High Pressure Outlet with Quick Connect To Know Your Pressure WasherNozzle Extension with Quick Connect Allows you to Attach Handle to the Pressure Washer Carton ContentsRemove Pressure Washer from Carton Washer for USETo install the oil dipstick Install Oil Dipstick on Pump Add GasolineAdd Engine Oil Connect Hose and Water Supply to Pump Checklist Before Starting EngineDo Not use if How to Start Your Engine HOW to USE Your Pressure WasherLow Pressure How to Stop Your Pressure WasherHow to Use the Nozzles Follow these instructions to change nozzlesAutomatic Cool Down System Pressure Washer Rinsing Cleaning and Applying ChemicalTo apply detergent follow these steps General Maintenance Recommendations SpecificationsPressure Washer Maintenance Purge Pump of Air Contaminants Nozzle MaintenanceCheck Gun and Nozzle Extension Check In-Line FilterTo remove a worn or damaged o-ring Storing the Engine Engine MaintenanceRing Maintenance Preparing the Unit for StorageSnapper 3500 PSI Pressure Washer Troubleshooting Exploded View Unit Qty Description Parts List UnitExploded View Pump Parts List Pump Exploded View Unloader Parts List Unloader Snapper 3500 PSI Pressure Washer Snapper 3500 PSI Pressure Washer Generac Portable Products, LLC Jefferson, Wisconsin U.S.A Snapper Owner Warranty Policy Effective October 1

3500PSI specifications

Briggs & Stratton, a reputable name in outdoor power equipment, has introduced the 3500PSI pressure washer, a powerful tool designed for demanding cleaning tasks. With its impressive 3500 PSI output, this pressure washer is capable of tackling tough jobs, making it an ideal choice for both homeowners and professionals.

One of the standout features of the Briggs & Stratton 3500PSI pressure washer is its powerful engine. Equipped with an OHV (Overhead Valve) engine, it provides reliable and efficient performance, ensuring that you can complete your cleaning tasks quickly and effectively. The engine is designed for easy starting and smooth operation, reducing the frustration often associated with gas-powered machines.

This pressure washer also features a heavy-duty steel frame, providing durability and stability during use. The construction ensures that the unit can withstand the rigors of regular use, whether you're cleaning driveways, patios, or vehicles. The sturdy design also includes large pneumatic tires, which allow for easy maneuverability across various terrains, making it convenient to transport and position the unit where it's needed most.

Equipped with an adjustable spray nozzle, the 3500PSI pressure washer allows users to customize the pressure output according to the specific cleaning task at hand. Whether you need a high-pressure jet for stubborn dirt and grime or a gentle spray for more delicate surfaces, this feature enhances versatility, ensuring optimal results across a range of applications.

Additionally, the pressure washer is designed with user-friendly features in mind. It includes an easy-to-access detergent tank, which facilitates the use of soaps and cleaners for enhanced cleaning power. The quick-connect nozzle system simplifies the process of switching between nozzles, allowing users to transition seamlessly during cleaning tasks.

For added safety, the Briggs & Stratton 3500PSI pressure washer includes various protective features such as a safety lock on the trigger and an automatic shut-off system. These technologies help prevent accidents and ensure the longevity of the equipment.

In summary, the Briggs & Stratton 3500PSI pressure washer combines power, durability, and user-friendly features to deliver an exceptional cleaning experience. With its robust engine, adjustable spray nozzle, and safety functionalities, it stands out as a reliable choice for anyone looking to invest in a high-performance pressure washer capable of tackling tough cleaning challenges.
Top Page Image Contents