Briggs & Stratton 020211-0 Applying Detergent with the Adjustable Nozzle, Pressure Washer Rinsing

Page 10

SpeedClean™ 2000 PSI Pressure Washer

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent, follow these steps:

1.Review use of adjustable nozzles.

2.Prepare detergent solution as required by job.

3.Place filter end of chemical injection hose into detergent container.

CAUTION

Keep the chemical injection tube from coming in contact with the hot muffler.

•When inserting the filter into a detergent solution bottle, route the tube so as to keep it from inadvertently contacting the hot muffler.

Pressure Washer Rinsing

For Rinsing:

1.Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear.

NOTE: You can also stop detergent from flowing by simply removing chemical injection hose from bottle.

2.Keep the spray gun a safe distance from the area you plan to spray.

3.Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

WARNING

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury if gun kicks back.

4.Slide adjustable nozzle forward to low pressure mode. Detergent cannot be applied with nozzle in high pressure position.

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Start engine.

6.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

7.Allow detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. DO NOT allow detergent to dry on (prevents streaking).

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

4.Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F.The system engages to cool the pump by

discharging the warm water onto the ground.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 2000PSI Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Know Your Pressure Washer Data Tag not shown, near rear of base platePreparing Pressure Washer for USE AssemblyCarton Contents Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpHow to Start Your Pressure Washer Checklist Before Starting EngineHOW to USE Your Pressure Washer How to Stop Your Pressure WasherHow to Use the Adjustable Nozzle Adjusting Nozzle for PressureAutomatic Cool Down System Applying Detergent with the Adjustable NozzlePressure Washer Rinsing Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance To remove contaminants from the pump, follow these steps Nozzle MaintenanceCheck In-Line Filter OrificeCleaning Chemical Injection Hose Engine MaintenanceRing Maintenance Pump MaintenanceStoring the Engine Preparing the Unit for StorageProtecting the Pump Troubleshooting Problem Cause CorrectionDescription Exploded View and Parts List Main UnitItems Not Illustrated Description Exploded View and Parts List Pump SpeedClean 2000 PSI Pressure Washer Limited Warranty Reglas DE Seguridad Tabla DE ContenidosDescripción DEL Equipo AdvertenciaPeligro Cuando Añada CombustiblePrecaución Conozca SU Maquina Lavadora DE Presion Remueva el Lavador a Presión del Empaque MontajePreparando EL Lavador a Alta Presión Para SU USO Contenido de la CajaAgregar Aceite al Motor y Gasolina Conecte la Manguera y el Suministro de Agua a la BombaLavadora a Presión Lista DE Revision Previa AL Arranque DEL MotorCómo Usar SU Máquina Cómo Darle Arranque a su Máquina Lavadora a PresiónCómo Usar la Boquilla Ajustable Figura 24 Ajustar la Presión de AspersiónSistema de Enfriamiento Automático Alivio Térmico Aplicación del Detergente Usando la Boquilla AjustableEnjuage de la Máquina Lavadora a Presión Para aplicar el detergente, siga los siguientes pasosRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Revise el Filtro en LíneaBoquilla Limpiando el Tubo Mantenimiento DEL MotorMantenimiento de los Anillos O Mantenimiento de la BombaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Notas Notas Reparacion DE Averias Garantía Limitada

020211-0 specifications

Briggs & Stratton is a renowned name in the world of small engine manufacturing, and one of their standout products is the Briggs & Stratton 020211-0 generator. This generator is designed to provide reliable backup power for homeowners, ensuring that essential appliances and devices remain operational during power outages.

The Briggs & Stratton 020211-0 features a robust engine that delivers consistent performance. It is equipped with a powerful 306cc OHV engine that efficiently converts fuel into energy, ensuring a steady output. This model is particularly known for its durability and long runtime capabilities, making it ideal for both emergency situations and recreational use.

One of the hallmark features of the 020211-0 is its portable design. It is lightweight yet sturdy, allowing users to easily transport the generator wherever needed. The generator also comes with built-in wheels and a handle, making mobility effortless. This portability makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where access to power is required.

In terms of power output, the 020211-0 has a running wattage of 5000 and a peak wattage of 6250, providing ample energy to run household appliances such as refrigerators, air conditioning units, and power tools. This capability is especially important during severe weather, when electrical outages are most common.

Safety is a major consideration in the design of the Briggs & Stratton 020211-0. The generator is equipped with a Low Oil Shutdown feature, which helps prevent engine damage by automatically shutting off the engine when oil levels drop too low. Additionally, the generator has a circuit breaker for added protection against overloads.

Another significant characteristic of the 020211-0 is its ease of operation. The electric start feature allows users to start the generator quickly and conveniently, eliminating the hassles of recoil starters. This user-friendly approach ensures that even those new to generators can operate it with confidence.

In summary, the Briggs & Stratton 020211-0 generator combines powerful performance, portability, safety features, and ease of use. Whether you need backup power for emergencies or additional power for recreational activities, this generator proves to be a reliable choice that meets diverse power needs. Its blend of technology and durability makes it a top contender in the generator market, a testament to Briggs & Stratton's commitment to quality and innovation.
Top Page Image Contents