Briggs & Stratton 020261-0 Pressure Washer Rinsing, Applying Detergent with the Adjustable Nozzle

Page 13

SpeedClean™ 2200 PSI Pressure Washer

4.Attach floor brush to brush extension (Figure 17). Tighten by hand.

Figure 17 - Attaching Floor Brush to Spray Gun

NOTE: You must use the adapter to attach the brush extension to the spray gun.

7.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

8.Allow detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. DO NOT allow detergent to dry on (prevents streaking).

Pressure Washer Rinsing

For Rinsing:

1.Engage trigger lock on spray gun.

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use detergents designed specifically for pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent, follow these steps:

1.Review use of adjustable nozzle.

2.Prepare detergent as required by manufacturer.

3.Pour detergent into cleaning tank.

NOTE: Cleaning tank holds one gallon of detergent.

4.Slide adjustable nozzle forward to low pressure mode. Detergent cannot be applied with nozzle in high pressure position.

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Start engine.

6.Rotate detergent shut-off valve on cleaning tank to “On” position (Figure 18).

Figure 18 — Detergent Shut-Off Valve

“On” Position

2.Make sure detergent shut-off valve is in “Off” position.

3.Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear.

4.Keep the spray gun a safe distance from the area you plan to spray.

WARNING

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when gun kicks back.

5.Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

6.Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F.The system engages to cool the pump by

discharging the warm water onto the ground.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Advertencia 2200PSISafety Rules Table of ContentsEquipment Description Operate pressure washer only outdoors When Adding FuelUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass High Pressure Outlet Know Your Pressure WasherPrimer Bulb Water Inlet Carton Contents AssemblyAttach Handle and Cleaning Tank Preparing Pressure Washer for USEAdd Engine Oil and Fuel Attach Detergent Siphon Hose to PumpConnect Hose and Water Supply to Pump Checklist Before Starting EngineHow to Start Your Pressure Washer HOW to USE Your Pressure WasherPressure Washer Location Pressure Washer ClearanceRecommended Starting Position How to Stop Your Pressure WasherHow to Use the Floor and Utility Brushes How to Use the Adjustable NozzleUsage Tips To attach the utility brush to the gunPressure Washer Rinsing Applying Detergent with the Adjustable NozzleAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Engine MaintenanceRing Maintenance Pump MaintenancePreparing Unit for Storage Always wear eye protection when using PumpSaverStoring the Engine Protecting the PumpProblem Cause Correction TroubleshootingSpeedClean 2200 PSI Pressure Washer Limited Warranty Descripción DEL Equipo Tabla DE ContenidosReglas DE Seguridad Símbolos de Peligro y SignificadosCuando Añada Combustible Cuando Pruebe LA Bujía DEL Motor Precaución Bomba Desarrolla alta presión de agua Conozca SU Maquina Lavadora a PresionTapón de Llenado y Varilla de Nivel de Aceite Permite Preparando EL Lavadora a Presión Para SU USO MontajeDesembale la Lavadora a Presión Contenido de la CajaAgregar Aceite al Motor y Combustible Montaje de Manguera de Sifón del Detergente a la BombaGancho del Pistola Manguera Coloque la lavadora a presión sobre una superficie niveladaLista de Revision Previa al Arranque del Motor Conecte la Manguera y el Suministro de Agua a la BombaDeposite la gasolina adecuada en el tanque del combustible Proporcione el suministro de agua adecuadoUbicación del Lavadora a Presión Cómo Usar SU Máquina Lavadora a PresiónCómo Darle Arranque a su Máquina Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónFigura 33 Posición Recomendada para el Arranque Cómo Detener su Máquina Lavadora a PresiónCómo Utilizar los Cepillos de Suelo y de Utilidad Cómo Usar la Boquilla AjustableUso Inclina Para montar el cepillo de utilidad en la pistolaEnjuage de la Máquina Lavadora a Presión Aplicación del Detergente Usando la Boquilla AjustableSistema de Enfriamiento Automático Alivio Térmico Para aplicar el detergente, siga los siguientes pasosRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora Presion Mantenimiento de la Boquilla Mantenimiento DEL MotorMantenimiento de los Anillos O Mantenimiento de la BombaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Almacene la unidad en un lugar limpio y secoReparacion DE Averias Uso comercial Uso del consumidor

020261-0 specifications

The Briggs & Stratton 020261-0 is a powerful portable generator designed to provide reliable and efficient backup power during emergencies or for outdoor activities. With a robust build and advanced technologies, this generator stands out in the market for its performance and user-friendly features.

One of the main features of the Briggs & Stratton 020261-0 is its 3000 running watts and 3750 starting watts capability. This capacity makes it suitable for powering essential appliances such as refrigerators, lights, and HVAC systems during outages, along with recreational uses like camping and tailgating. The generator is equipped with a 127cc engine that delivers efficient fuel consumption, allowing it to run for extended periods on a single tank. Its fuel tank has a capacity of 1.5 gallons, supporting a runtime of up to 9 hours at a 25% load.

In terms of technology, the Briggs & Stratton 020261-0 features a reliable recoil start system, which is both simple and effective. It is designed for easy portability, thanks to its lightweight construction and integrated handle. The generator also has a built-in circuit breaker to help protect the generator and connected devices from overload, enhancing safety during operation.

Another notable characteristic of the 020261-0 is its low noise operation. The generator is engineered for quieter functioning, making it ideal for use in residential areas or campgrounds where noise regulations may apply. Additionally, it has multiple outlets, including two household outlets and one 12V DC outlet for charging batteries, providing flexibility in powering various devices simultaneously.

Maintenance is made straightforward with the Briggs & Stratton 020261-0, as it boasts an easily accessible oil drain and a durable frame that can withstand rugged use. The generator's design prioritizes user convenience, ensuring that both setup and transport are hassle-free.

Overall, the Briggs & Stratton 020261-0 combines power, efficiency, and portability, making it an excellent choice for those in need of reliable backup power. With its solid performance, advanced safety features, and ease of use, it caters to the demands of both homeowners and outdoor enthusiasts alike, ensuring peace of mind when power outages occur or when venturing away from a traditional power source.
Top Page Image Contents