Briggs & Stratton 20216 Preparing the Unit for Storage, Storing the Engine, Protecting the Pump

Page 14

2600 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush chemical injection hose by placing filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in forward position). Flush for one to two minutes.

2.Shut off engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty pump of all pumped liquids by pulling recoil handle about 6 times.This should remove most liquid in pump.

4.Use PumpSaver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: PumpSaver will drip from pump after treatment and will stain wood and concrete.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

14

Image 14

Contents 020216 2600 PSI Equipment Description Table of ContentsSafety Rules When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Safety Goggles not shown Always use the enclosed Know Your Pressure WasherPreparing Pressure Washer for USE AssemblyCarton Contents Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpHow to Start Pressure Washer Checklist BeforeHOW to USE Your Pressure Washer How to Stop Pressure WasherMode Detergent application How to Use the Adjustable NozzleUsing the Turbo Nozzle To attach the turbo nozzle to the spray gunAutomatic Cool Down System Applying Detergent with the Adjustable NozzlePressure Washer Rinsing Thermal ReliefPressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations To remove contaminants from the pump, follow these steps Nozzle MaintenanceCheck In-Line Filter OrificeCleaning Chemical Injection Hose Engine MaintenanceRing Maintenance Pump MaintenanceStoring the Engine Always wear eye protection when using PumpSaverPreparing the Unit for Storage Protecting the PumpTroubleshooting Problem Cause CorrectionItems Not Illustrated Description Exploded View and Parts List Main UnitDescription Exploded View and Parts List Pump PSI Pressure Washer Years or Hours Consumer Use YearsYear Instrucciones DE Seguridad Tabla DE ContenidosDescripción DEL Equipo AdvertenciaPeligro Cuando Añada CombustiblePrecaución Filtro de Aire Conozca SU Maquina Lavadora DE PresionPistola de Rociado Tanque del Combustible Perilla del Cebador Usada para arranque de motores fríosRemueva el Lavador a Presión del Empaque MontajePreparando EL Lavador a Presión Para SU USO Contenido de la CajaAgregar Aceite al Motor y Gasolina Conecte la Manguera y el Suministro de Agua a la BombaCómo Darle Arranque a su Lavadora a Presión Lista DE Revision Previa AL Arranque DEL MotorCómo Usar SU Lavadora a Presión Cómo Detener su Lavadora a PresiónPara conectar el boquilla a chorro a la pistola de rociado Cómo Usar la Boquilla AjustableCómo Usar la Boquilla a Chorro Sistema de Enfriamiento Automático Alivio Térmico Aplicación del Detergente Usando la Boquilla AjustableEnjuage de la Máquina Lavadora a Presión Para aplicar el detergente, siga los siguientes pasosMantenimiento DE LA Maquina Lavadora a Presion EspecificacionesRecomendaciones Generales Boquilla Mantenimiento de las BoquillasRevise el Filtro en Línea Limpiando el Tubo Mantenimiento DEL MotorMantenimiento de los Anillos O Mantenimiento de la BombaProteger la Bomba Preparando LA Unidad Para SU AlmacenamientoAlmacenando EL Motor Notas Notas Reparacion DE Averias Garantía Limitada