Briggs & Stratton 01805, 01806 High pressure spray may damage fragile items including glass

Page 4

Pressure Washer

WARNING

Running engines produce heat and hot exhaust gases.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Fire or severe burns can occur.

•DO NOT touch hot surfaces.

•Stay clear of exhaust gases.

•Allow equipment to cool before touching.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

CAUTION

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

•DO NOT tamper with governed speed.

•DO NOT operate pressure washer above rated pressure.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

CAUTION

High pressure spray may damage fragile items including glass.

•DO NOT point spray gun at glass when in jet spray mode.

•NEVER aim spray gun at plants.

CAUTION

Improper treatment of pressure washer can damage it and shorten its life.

•If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

•NEVER operate units with broken or missing parts, or without protective housing or covers.

•DO NOT by–pass any safety device on this machine.

•Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

•NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

•Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer.

•This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 01805 2500 PSI 01806 2650 PSI 01936 2550 PSI Table of Contents Safety RulesHazard Symbols and Meanings Equipment DescriptionWhen Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Assembly Preparing Pressure Washer for USERemove Pressure Washer From Carton Attach Handle to UnitInstall J Hook on Accessory Tray Add Fuel Add Engine OilTo attach handle supplied with two L hooks Model Connect Hose and Water Supply to Pump Checklist Before Starting EngineModel HOW to USE Your HOW to USE NozzlesHow to Start Pressure Washer How to Stop Pressure WasherIf Unit is Equipped with Adjustable Nozzle Cleaning and Applying ChemicalFollow these instructions to change spray tips To apply detergent follow these stepsCleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief Discharging the warm water onto the groundGeneral Maintenance Recommendations Pressure Washer MaintenanceNozzle Maintenance Adjustable nozzleOrifice Quick-connect spray tipsEngine Maintenance Ring MaintenancePump Maintenance Purge Pump of Air ContaminantsPreparing the Unit for Storage Storing the EngineTroubleshooting Problem Cause CorrectionOUR Equipment Tabla DE Contenidos Descripción DEL EquipoInstrucciones DE Seguridad AdvertenciaPeligro Cuando Añada CombustiblePrecaución Montaje Preparando EL Lavador a Presión Para SU USORemueva el Lavador a Presión del Empaque Conecte el ManubrioPara Conecte el Manubrio con Dos Perno L Modelo Gancho del PistolaAñada Gasolina Agregar Aceite al MotorConecte la Manguera y el Suministro de Agua a la Bomba Modelo Lista DE Revision Previa AL Arranque DEL Motor01806 Cómo Usar SU Lavadora a Presión Cómo Usar LAS BoquillasCómo Darle Arranque a su Lavadora a Presión Cómo Detener su Lavadora a PresiónSi la Unidad Está Equipada con la Boquilla Regulable Limpieza y Aplicación del QuímicoPara cambiar las boquillas Detergentes caseros podrían dañar la bombaEnjuage de la Máquina Lavadora a Presión Limpiando el Tubo de Sifón del DetergenteSistema de Enfriamiento Automático Alivio Térmico Lave de 1 a 2 minutosRecomendaciones Generales Mantenimiento DE LA Lavadora a PresionElimine el Aire y los Contaminantes de la Bomba Mantenimiento de los Anillos OBoquillas con conector rápido Para retirar el aire de la bomba, siga los siguientes pasosMantenimiento DEL Motor Preparando LA Unidad Para SU AlmacenamientoAlmacenando EL Motor Mantenimiento de la BombaReparacion DE Averias Garantía Limitada 01806 2650 PSI Exploded View and Parts List Main Unit PSI Pressure WasherDescription Items Not Illustrated DescriptionExploded View and Parts List Pump PSI Pressure Washer

01806, 01805 specifications

Briggs & Stratton is a renowned name in the world of small engines, famously known for producing reliable and efficient power solutions for various applications. Among their impressive lineup, the models 01806 and 01805 stand out, designed to meet the demands of both consumers and professionals alike.

The 01806 model features a powerful engine with a displacement of 500cc, delivering exceptional torque and horsepower that make it suitable for a variety of applications, including lawn mowers, generators, and other outdoor equipment. Its superior performance is complemented by a user-friendly design, making it easy to operate even for those who are not mechanically inclined.

One of the key features of the Briggs & Stratton 01806 is its innovative READY START technology. This system eliminates the need for choke adjustments, allowing for effortless starting in any weather condition. Users simply pull the starter rope, and the engine fires up with ease, providing convenience for individuals who may find traditional starting methods cumbersome.

Another notable attribute of this model is its OHV (Overhead Valve) design. This technology provides better fuel efficiency, enhanced power output, and lower emissions compared to traditional flat-head engines. An OHV configuration allows for better airflow, resulting in improved combustion and overall performance.

The 01805 model also boasts similar features but comes with slight variances in horsepower and specifications tailored for specific applications. While both models emphasize durability and reliability, the 01805 is designed with lightweight construction, making it an ideal choice for equipment that requires portability without sacrificing power.

Both models feature heavy-duty components, such as a single-piece crankshaft and a contained air filtration system that protects the engine from debris, extending its operational longevity. Their compact size and clever engineering ensure they fit in a variety of applications seamlessly while providing maximum output.

In summary, the Briggs & Stratton 01806 and 01805 are exemplary models crafted for efficiency and reliability. Their advanced technologies cater to the needs of users seeking both power and ease of use. Whether for residential or commercial applications, these engines strive to uphold the prestigious reputation synonymous with the Briggs & Stratton name. The combination of reliable starting, efficient design, and durable construction ensures that these engines keep working year after year, providing outstanding performance across various tasks.
Top Page Image Contents