Taylor Pool Heat Pump owner manual Operation

Page 20

3.OPERATION:

The control is first shipped in the OFF mode. The digital display will show «- - -» , indicating the OFF mode. THE CONTROL MUST BE IN THE ON MODE IN ORDER TO CHANGE THE SETPOINT (THE DESIRED WATER TEMPERATURE) OR HAVE ACCESS TO THE OTHER FEATURES! The setpoint is factory set at 70 °F.

a. SWITCHING THE HEATPUMP ON:

Hold the [SET] key for 3 seconds. The set mode LED will come on to indicate the set mode. Now touch the [%] key. The display will now show the actual water temperature. If there is a demand for heat, that is if the actual water temperature is lower than the desired or setpoint temperature, the Heat On LED, the compressor and fan will come on. Note that each time the compressor turns off there will be a 5 minute delay before it can be turned on. After 8 seconds the set mode LED will go off.

b. SWITCHING THE HEATPUMP OFF:

Hold the [SET] key for 3 seconds. The set mode LED will come on to indicate the set mode. Now touch the [%] key. The display will now show «- - -». After 8 seconds the set mode LED will go off.

c. TO VIEW THE SETPOINT OR DESIRED TEMPERATURE:

Hold the [^] key to display the setpoint or desired temperature.

d. TO VIEW THE DEFROST TEMPERATURE:

Hold the [v] key to display the defrost temperature.

e. TO CHANGE THE SETPOINT TEMPERATURE:

Hold the [SET] key for 3 seconds. The set mode LED will come on to indicate the set mode. Now touch the [^] key to increase the value or the [v] key to decrease the value. The adjustment range is from 70 °F to 105 °F ( 21 °C to 41 °C in Celsius mode ). You have 8 seconds from the time that the last key was touched to make the adjustment. After 8 seconds the set mode LED will go off.

f. BACKWASH OPERATION:

Hold the [BACKWASH] key for 3 seconds. The display will show [bac] to indicate the backwash mode. In this mode the heatpump is turned off for 20 minutes in order to allow time for backwash. The heatpump will turn on automatically at the end of the 20 minutes. If you would like to turn on the heatpump before the 20 minute delay, simply press the [BACKWASH] key for 3 seconds ( when the circulation pump is returned to the filter position).

g. SWITCHING BETWEEN °F AND °C:

Hold the [SET] key for 3 seconds. The set mode LED will come on to indicate the set mode. Touch the [^] key and the [BACKWASH] simultaneously to select the °F mode. Touch the [v] key and the [BACKWASH] simultaneously to select the °C mode. After 8 seconds the set mode LED will go off.

4.CALIBRATION:

Other features are available on the control which aid for both installation and servicing.

a. TO VIEW DEFROST TEMPERATURE:

To view the defrost temperature, push the [v] keys.

b. TO CANCEL THE 5 MINUTE ANTI-SHORT CYCLE DELAY:

For a quick restart, push both the [BACKWASH] and [%] keys for 3 seconds. Ensure that the high and low pressures are equalized.

20

Image 20
Contents Pool Heat Pump Table of Contents Low Maintenance IntroductionCost-efficient Heater How Does It Work?Other Recommendations Air Supply and AccessibilitySelecting the Location Water Inlet and Outlet Connections Pressure-type Chlorinator or Brominator Basic ConnectionChlorinators, Brominators and Other Automatic Systems Dual Unit Connection In-line Chlorinator or BrominatorSalt Chlorinator Using One Pump and One Filter for the Pool and the Spa Pool and SPA ConnectionElectrical Connection Maintenance CleaningWinterizing Cupro-nickel heat exchanger Winterizing Titanium heat exchangerWinterizing Titanium heat exchanger Seasonal Start-up Water DeviationWater Chemistry Water MaintenanceWhy Perform Water Maintenance? PH of Various Chemical Products for Pools Sanitizers Shock TreatmentBromine Testing What to do?Swimming Pool Heatpump Control Instrument Identification Operation To Enter the Service Mode Error Code List Code Symptom Probable Cause Solution Solving Problems Error Possible Causes Possible SolutionsQuestions and Answers Warranty Pool Heat PumpsLimited Warranty 690, Place Trans-Canada Longueuil, QC, J4G 1P1

Pool Heat Pump specifications

The Taylor Pool Heat Pump is a state-of-the-art heating solution designed to provide efficient and effective temperature control for swimming pools. Emphasizing energy efficiency and environmental sustainability, this advanced heat pump utilizes cutting-edge technology to ensure optimal performance while minimizing operational costs.

One of the key features of the Taylor Pool Heat Pump is its inverter technology. This innovation allows the unit to adjust its heating output based on the pool's current temperature, ensuring that it operates at the most efficient level. By running at variable speeds, the heat pump can maintain steady water temperatures without the significant energy spikes associated with traditional heating systems. This efficiency helps pool owners save money on energy bills while still enjoying a comfortably heated swimming environment.

Another notable characteristic of the Taylor Pool Heat Pump is its high COP (Coefficient of Performance). This metric indicates how effectively the heat pump converts electrical energy into heat. With a COP that frequently exceeds 5.0, the Taylor Pool Heat Pump showcases its ability to deliver more than five units of heating for every unit of electricity consumed, making it one of the most powerful and efficient options on the market.

The construction of the Taylor Pool Heat Pump is also designed to withstand the elements. Featuring a durable casing and weather-resistant components, the unit is built to endure harsh outdoor conditions without compromising performance. This robustness extends the lifespan of the heat pump, making it a reliable choice for pool owners who seek long-term heating solutions.

Additionally, the Taylor Pool Heat Pump operates quietly, thanks to its advanced sound-dampening features. This design consideration allows users to enjoy their pool area without the distraction of loud mechanical noises, making it a pleasant environment for relaxation and entertainment.

For ease of use, the Taylor Pool Heat Pump incorporates smart technology, enabling remote control and monitoring via smartphone applications. This modern feature allows pool owners to adjust settings, track energy usage, and schedule heating cycles, all from the convenience of their mobile devices.

In summary, the Taylor Pool Heat Pump stands out with its inverter technology, high COP, durable construction, quiet operation, and smart capabilities. Together, these features create a comprehensive and user-friendly heating solution that enhances the pool experience while promoting energy efficiency and sustainability. Whether used in residential or commercial settings, the Taylor Pool Heat Pump is designed to meet the diverse needs of pool owners worldwide.