Troubleshooting Honeywell S8600, Electrical

ELECTRICAL

WARNING

HIGHVOLTAGE

For qualified Technicians ONLY

NOTE: Some heaters may be equipped with an ignition module that shuts off pilot gas if pilot fails to light. To reset, interrupt power to heater.

START

TURN GAS SUPPLY OFF.

TURN THERMOSTAT

(CONTROLLER) TO CALL

FOR HEAT

POWER TO MODULE

(24VNOMINAL)

YES

SPARK ACROSS

IGNITER/SENSORGAP

YES

TURN GAS SUPPLY ON

PILOT BURNER LIGHTS?

YES

SPARK STOPS WHEN

PILOT IS LIT?

YES

MAINBURNERLIGHTS?

YES

SYSTEM RUNS UNTIL

CALL FOR HEAT ENDS?

YES

Intermittent Pilot System

TROUBLESHOOTING HONEYWELL S8600

				NOTE:Before troubleshooting, familiarize yourself with the startup and checkout
				procedure.

				Check line voltage power, low voltage transformer, limit controller, thermostat (control-
	NO
				ler) and wiring.




				Pull ignition lead and check spark at module.
				Pull ignition lead and check spark at module.
	NO
				Spark Okay?


				YES

				• Check ignition cable, ground wiring, ceramic insulator and gap, and correct.
				• Check boot of the ignition cable for signs of melting or buckling. Take protective
				action to shield cable and boot from excessive temperatures.

	NO			• Check that all manual gas valves are open, supply tubing and pressures are good,
	NO
				and pilot burner orifice is not blocked.
				and pilot burner orifice is not blocked.
				• Check electrical connections between module and pilot operator on gas control.
				• Check for 24 Vac across PV-MV/PV terminals on module. If voltage is okay,
				replace gas control; if not, replace module.

				NOTE:If S8600H goes into lockout, reset system. Lockout is used on Pro. models.


	NO			• Check continuity of ignition cable and ground wire.
	NO			• Check continuity of ignition cable and ground wire.
				• Clean flame rod.
				• Check electrical connections between flame rod and module.
				• Check for cracked ceramic flame rod insulator.
				• Check that pilot flame covers flame rod and is steady and blue.
				• Adjust pilot flame.
				• If problem persists, replace module.

				• Check for 24 Vac across MV-MV/PV terminals. If no voltage, replace module.
	NO
				• Check electrical connections between module and gas control. If okay, replace

				gas valve or gas control operator, i.e. pilot gas valve, flow switch etc.

				NOTE: IF S8600H goes into lockout, reset system.
				NOTE: IF S8600H goes into lockout, reset system.
	NO
				• Check continuity of ignition cable and ground wire.


				NOTE: If ground is poor or erratic, shutdowns may occur occasionally even though
				operation is normal at the time of checkout.
				• Check that pilot flame covers flame rod and is steady and blue.
				• If checks are okay, replace module.

CALL FOR HEAT ENDS

SYSTEM SHUTS OFF?

YES

TROUBLESHOOTING

ENDS

•Check for proper thermostat (controller) operation.

•Remove MV lead at module; if valve closes, recheck temperature controller and wiring; if not, replace gas valve.

Repeat procedure until troublefree operation is obtained.

514-824 specifications

The Raypak 514-824 is a leading model in the realm of heating solutions, specifically designed for outdoor residential and commercial applications. Known for its efficiency and durability, the Raypak 514-824 has gained popularity among users looking for reliable heating systems.

One of the standout features of the Raypak 514-824 is its advanced design that incorporates high-quality materials ensuring longevity. This model is constructed with a robust heat exchanger, typically made of copper or bronze, which promotes better thermal conductivity while resisting corrosion. This ensures that the unit maintains a high performance level even after prolonged use, making it an excellent choice for areas with varying weather conditions.

The technological aspects of the Raypak 514-824 are also impressive. It is equipped with an intuitive digital control system that allows for precise temperature adjustments. Users can easily set their desired temperature, which is maintained automatically, providing comfort with minimal manual control. The digital display is user-friendly, making it simple to monitor system performance and adjust settings as needed.

Efficiency is a critical characteristic of the Raypak 514-824. With a focus on energy-saving capabilities, this heater exceeds industry standards, often achieving efficiency ratings that minimize energy consumption. This not only results in cost savings on utility bills but also contributes to environmental sustainability, making it a more responsible choice for heating needs.

Safety features are paramount in the design of the Raypak 514-824. It includes various protections such as high-limit switches and pressure regulators that help prevent overheating and maintain optimal operating conditions. These safety measures ensure that the unit operates reliably and minimizes risks associated with traditional heating systems.

Furthermore, installation versatility sets the Raypak 514-824 apart. It is designed for straightforward installation, suitable for various setups whether it's integrated with a swimming pool or spa heating system. This adaptability makes it an ideal selection for anyone looking to enhance their outdoor space with effective heating solutions.

In summary, the Raypak 514-824 is a high-performing, efficient, and versatile heating model that combines modern technology with significant safety features. Its emphasis on user-friendly operation and long-lasting materials makes it a top contender in the heating market, catering to both residential and commercial applications. The Raypak 514-824 exemplifies a commitment to quality, efficiency, and reliability.