MD6210M
6. Set up
FLEXIBLE HOSE and SWIVEL JOINT
1.Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. Fix the clamp (small) with the intermediate valve.
(5)
(4)
(3) (1) (4) (2)
(1)Flexible hose
(2)Swivel joint
(3)Clamp (Large)
(4)Clamp (Small)
(5)Intermediate valve (fixed with clamb (small))
NOTE
A light lubricant may be used to ease assembly of flexible pipe to blower elbow.
CONTROL HANDLE
•Set up the handle holder to the swivel joint and tighten the screw on the handle holder. Use the clamp to fas- ten the solution pipe to the pipe.
(4)
(4)
BEND PIPE AND MIST NOZZLE
•Connect the swivel joint and bend pipe. Push the pipes together and turn them so they lock in relation to one another until the connection is locked. Connect the mist nozzle to the bend pipe.
(1)
(2) (3)
(2)
(1)Swivel joint
(2)Bend pipe
(3)Mist nozzle
SOLUTION TUBE
•Route the solution tube from material tank to the mist nozzle.
G B
(3) (1) (2)
(1)Handle holder
(2)Swivel joint
(3)Screw
(4)Clamp