Zenoah MD6210M Precautions Before Spraying, Precautions When Transporting Chemicals, Fuel

Page 7

MD6210M

5. For safe operation

around 30 ~ 40 minutes per ses- sion, and take 10 ~ 20 minutes of rest between work sessions. Also try to keep the total amount of work performed in a single day under 2 hours or less.

WARNING

If you don’t observe the working time, or working manner, Repeti- tive Stress Injury (RSI) could oc- cur.

If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doc- tor before getting worse.

PRECAUTIONS BEFORE SPRAYING

Make sure you have the correct protective clothing, headgear, rubber gloves and boots, a pro- tective mask, goggles, a towel, protective cream, etc., to prevent chemicals from coming into con- tact with your skin or entering your lungs. When spraying, please wear this protective gear to pre- vent any risk of injury.

1.Protective headgear

2.Protective goggles

3.Protective mask

4.Rubber boots

5.Ear muffs

6.Neck covering

7.Protective clothing

8.Rubber gloves

9.Protective clothing

Please store chemicals in a locked storage box, locker, or other safe place out of the reach of children.

Carefully read the instructions for using the chemicals, and famil- iarize yourself with the level of tox- icity, method of use, etc.

Please pay all due consideration to the area in which you will be spraying, to ensure that you do not pollute the water supply, riv- ers, lakes, ponds, etc., or cause any damage to residents, passers-by, livestock, etc.

Prepare yourself physically on the day before spraying, by for ex- ample cutting down on alcoholic beverages or late-night work.

Do not allow children, animals, etc., to enter the chemical spray- ing area.

Before spraying, please prepare fully by inspecting sprayer nozzles and checking for abnor- malities such as loose screws or spray hose connections, fuel leaks, defective or broken fluid gaskets, or damage to the carry- ing band.

PRECAUTIONS WHEN TRANSPORTING CHEMICALS

When transporting chemicals, please handle with care to ensure that there is no spillage of chemi- cals from torn bags, broken bottles, or loose stoppers.

Do not carry chemicals in the same container as food.

PRECAUTIONS WHEN TRANS- PORTING THE SPRAYER

Do not transport the sprayer while it has chemicals or fuel in the tank, as these could leak out as a re- sult of impact during transporta- tion.

When transporting in a vehicle, please use a rope or similar to fix the sprayer firmly to the cargo trailer in an upright position. Please do not transport by bicycle or motorbike, as this is danger- ous.

FUEL

WARNING

To reduce the risk of fire and burn injury:

a)Handle fuel with care. It is highly flammable.

b)Do not smoke while handing fuel.

c)Do not refuel a hot engine.

d)Do not refuel a running engine.

e)Avoid spilling fuel or oil. Always wipe unit dry before using.

f ) Move at least 10 ft. (3 meters) away from the fueling point be- fore starting engine.

g)Always store gasoline in a con- GB-7

G B

Image 7
Contents GB-1 MD6210ME13*97/68SH3G3*2002/88*0095*02 Wear head, eye and ear protectionMeasured MD6210M 62.0 cm 107 dBA 108 dBA 102 dBAParts location ContentsMD6210M SpecificationSymbols on the ma- chine ModelWorking Condition For safe operationNever let a child under 13 years old use the machine Always follow the instructionsWorking Plan Other PrecautionsAvoid Noise Problem Working CircumstanceFuel Precautions Before SprayingPrecautions When Transporting Chemicals Precautions When TRANS- Porting the SprayerCondition Precautions When Refilling ChemicalsUsing the Product GB-8 Tainer approved for flammable liq- uidsDo not allow bystanders in work area MaintenanceGB-10 TransportationStorage DisposalControl Handle Set upSolution Tube Flexible Hose and Swivel JointFueling the Unit HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50 OILControl ARM Adjusting Idle SpeedHOW to USE OperationHorizontal direction 12 m Vertical direction GB-14 Fuel Filter MaintenanceAIR Cleaner Cleaning AIR FilterShoulder Strap Procedures to be Performed After Every 100 Hours of USEMuffler AIR Inlet NETDisposal StorageCheck Probable Causes Action Troubleshooting guideLimited warranty Case 1. Starting failure