Adjusting the Maximum Speed

8. Operation

•The screw at the throttle lever is for adjusting the maxi- mum rpm.

•Turning the screw crock-wise, the rpm becomes down, the otherwise, the rpm becomes up. (STANDARD OP- ERATION SPEED: 8000 to 9500 rpm)

Running engine with faster engine speed than 9500 rpm may damage the engine, slower engine speed than 8000 rpm may cause of the poor cutting ability.

up	adjust screw
up
	down

WARNING

•This product is equipped with extremely sharp blades, and when used improperly these blades can be ex- tremely dangerous, and improper handling can cause accidents which may in turn lead to serious injury or death. For this reason, you should always be careful to follow the following instructions when using your trimmer.

•Never hold the trimmer in a way in which the blades are pointed towards someone else.

•Never allow the blades to come into proximity with your body while the engine of the trimmer is in opera- tion.

•Always be sure to turn off the engine before chang- ing the angle of the blades, removing branches which have become stuck in the blades, or at any other time when coming into close proximity with the blades.

•Always wear work gloves made of leather or some other sturdy material when using the trimmer.

•Always place the blade cover provided with the trim- mer over the blades when not in use.

•Falling branches may fall onto the face or into the eyes, resulting in injuries, scratches, and cuts, and for this reason you should always be sure to wear a helmet and face protector when using your trimmer.

NOTE

•The thickness of branches which may be cut using this trimmer is limited to up to approximately 4.8mm. Never try to cut branches thicker than this, as doing so may result in damage to the trimmer.

LRTZ2600

ADJUSTING THE ANGLE OF THE

CUTTING BLADES

1.	Stop the trimmer engine.
2.	Turn the bolt located on the top of the trimming mecha-
	nism counter-clockwise to loosen it.		G
3.	Adjust the angle of the blades to the desired angle,		B
	and then fix the bolt firmly back into place.
	(1)	Clamp bolt
	(2)	Trimming mechanism
	(3)	Tighten
	(4)	Loosen

GB-11

LRTZ2600 specifications

The Zenoah LRTZ2600 is a high-performance two-stroke engine that has gained popularity among enthusiasts for its robust features and advanced technologies. Engineered for reliability and efficiency, the LRTZ2600 is particularly favored in applications such as remote-controlled aircraft, boats, and various hobby-grade vehicles.

At its core, the LRTZ2600 boasts a displacement of 26 cc, which provides a powerful punch for various demanding applications. Its design incorporates a lightweight construction that ensures improved power-to-weight ratios, which is crucial for enhancing performance in dynamic environments. With its dual ball-bearing system, this engine minimizes friction, resulting in enhanced durability and extended operational life.

One of the standout features of the Zenoah LRTZ2600 is its easy starting mechanism. Designed with user-friendliness in mind, the engine is equipped with a choke system that simplifies the starting process, making it accessible for both beginners and seasoned hobbyists alike. Additionally, it features a tuned exhaust system that optimizes exhaust flow, improving overall efficiency and performance.

The advanced ignition system in the LRTZ2600 is another highlight. Incorporating a digital CDI (Capacitor Discharge Ignition) system, the engine delivers a reliable spark and ensures consistent performance even under varying conditions. This technology allows for precise timing adjustments, enabling the engine to operate smoothly across a wide range of RPMs.

In terms of fuel efficiency, the LRTZ2600 stands out with its optimized combustion chamber design. This design not only enhances fuel atomization but also ensures a cleaner burn, leading to reduced exhaust emissions. This characteristic is particularly appealing to environmentally conscious users looking for powerful engines that minimize their carbon footprint.

Engine maintenance is straightforward, thanks to the LRTZ2600’s modular design. Components are easily accessible, allowing for quick tune-ups and repairs. The engine also features an adjustable carburetor, enabling users to fine-tune performance settings to suit their specific needs and preferences.

Overall, the Zenoah LRTZ2600 is a testament to innovation in engine technology, blending power, efficiency, and user-friendly features. Whether you’re flying a model airplane or racing a remote-controlled car, this engine promises to deliver an exhilarating experience with every use. As hobbyists increasingly demand high-quality performance, the LRTZ2600 stands out as a dependable choice in the competitive landscape of small engines.

8. Operation