Zenoah LRTZ2600 owner manual Set up

Page 8

LRTZ2600

6. Set up

MOUNTING ENGINE

1.Push the drive shaft housing toward the clutch hous- ing and move it by hand to check that the drive shaft is engaged with the gears.

2.Insert the drive shaft housing into the clutch housing until it bottoms, and align the positioning holes on the clutch housing and the shaft tube and install the screw. When difficult to engage, twist the engine slightly.

3.Fasten the clamp securely with two screws.

Bolt

WARNING

Never use any screws other than those specified by the manufacturer, or the engine can get loose, result- ing in a hazardous event.

IMPORTANT

Tighten the screws gradually by turns.

CONNECTING THROTTLE WIRE

1.Remove the air cleaner cover.

2.Connect the end of the throttle wire to the joint on the top of the carburetor.

CONNECTING SWITCH WIRES

•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you.

About 48cm

ATTACHING THE TRIMMING MECHANISM

1.Remove the cap on the end of the main pipe.

2.Remove the screw screwed into the end of the trim- ming mechanism.

3.Insert the end of the trimming mechanism into the main pipe.

4.Line up the hole on the end of the trimming mecha- nism into which the screw is to be inserted with the hole on the main pipe, and screw the screw firmly in.

5.Using a 10-mm wrench, screw in the hexagonal bolt provided to fix the trimming mechanism into place.

(1)Main pipe

(2)Trimming mechanism

(3)Screw hole

(4)Screw

(5)Fastening bolt

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Depending on the working posture, slide clamp up or down until unit balances and the strap fits your body.

GB-8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LRTZ2600 GB-1Wear head, eye and ear protection LpA LwA Idling RacingLRTZ2600 25.4 cm 99 dBA 108.2 dBA 110 dBA 05 m/s 35 m/s E13*97/68SH2G3*2002/88*0094*03Contents Parts locationSpecification Symbols on the machineModel LRTZ2600 Never modify your machineFor safe operation Working ConditionWorking Circumstance Working PlanGB-6 Contact with any obstacle when the engine starts Using the ProductBefore Starting Engine Area within a perimeterMaintenance If Someone ComesHandling Fuel TransportationSet up Fuel Adjusting Throttle Cable Adjusting Idling SpeedOperation Starting EngineStop the trimmer engine Adjusting the Maximum SpeedAdjusting the Angle Cutting Blades Maintenance Replacement Plug is a NGK CMR7A AIR FilterFuel Filter Spark PlugProcedures to be Performed After EV- ERY 100 Hours of USE StorageDisposal Intake AIR Cooling VentTroubleshooting guide Limited warrantyCase 1. Starting failure Check Probable Causes Action

LRTZ2600 specifications

The Zenoah LRTZ2600 is a high-performance two-stroke engine that has gained popularity among enthusiasts for its robust features and advanced technologies. Engineered for reliability and efficiency, the LRTZ2600 is particularly favored in applications such as remote-controlled aircraft, boats, and various hobby-grade vehicles.

At its core, the LRTZ2600 boasts a displacement of 26 cc, which provides a powerful punch for various demanding applications. Its design incorporates a lightweight construction that ensures improved power-to-weight ratios, which is crucial for enhancing performance in dynamic environments. With its dual ball-bearing system, this engine minimizes friction, resulting in enhanced durability and extended operational life.

One of the standout features of the Zenoah LRTZ2600 is its easy starting mechanism. Designed with user-friendliness in mind, the engine is equipped with a choke system that simplifies the starting process, making it accessible for both beginners and seasoned hobbyists alike. Additionally, it features a tuned exhaust system that optimizes exhaust flow, improving overall efficiency and performance.

The advanced ignition system in the LRTZ2600 is another highlight. Incorporating a digital CDI (Capacitor Discharge Ignition) system, the engine delivers a reliable spark and ensures consistent performance even under varying conditions. This technology allows for precise timing adjustments, enabling the engine to operate smoothly across a wide range of RPMs.

In terms of fuel efficiency, the LRTZ2600 stands out with its optimized combustion chamber design. This design not only enhances fuel atomization but also ensures a cleaner burn, leading to reduced exhaust emissions. This characteristic is particularly appealing to environmentally conscious users looking for powerful engines that minimize their carbon footprint.

Engine maintenance is straightforward, thanks to the LRTZ2600’s modular design. Components are easily accessible, allowing for quick tune-ups and repairs. The engine also features an adjustable carburetor, enabling users to fine-tune performance settings to suit their specific needs and preferences.

Overall, the Zenoah LRTZ2600 is a testament to innovation in engine technology, blending power, efficiency, and user-friendly features. Whether you’re flying a model airplane or racing a remote-controlled car, this engine promises to deliver an exhilarating experience with every use. As hobbyists increasingly demand high-quality performance, the LRTZ2600 stands out as a dependable choice in the competitive landscape of small engines.
Top Page Image Contents