Zenoah BM40S Parts location, Specifications, For safe operation, Before Using, Working Condition

1. Parts location

36

5

7

4

1

1. Tank

2. Pump

3. Lid (cap)

4. Shoulder Strap

25. Hose

6.Wand

7.Nozzle, Spray Tip Set

Tank shape is a Trademark of SP Systems LC /Swissmex

2. Specifications

Type········································································Back Pack

Model Name·································································BM40S

Dimensions (LxWxH) ·························530x360x210 (20.9x14.2x8.3) mm (in)

Dry Weight··········································································5.2 (10.4) kg (lbs)

Tank Capacity·································································15.1 (4.0) litter (Gal)

Max. Pressure ····························································10.5 (150) kgf/cm2 (psi)

Working Pressure········································1.05 – 5.6 (15 – 80) kgf/cm2 (psi)

Sealed/O rings············································································VITON/Nytril

Pump Type ····························································External Sealed Piston

Reparability················································································YES

Tank Mouth··································································································6"

Wand Type······················································································20" Brass

Standard Nozzle ······················································Adjustable Brass Nozzle

3. Warning labels on the machine

IMPORTANT

If warning label peel off or become soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).

WARNING

Never modify your machine.

We won't warrant the machine, if you use the remodeled machine or you don't observe the proper usage written in the manual.

4. For safe operation

WARNING

1.Read this Sprayer Owner/Operator Manual carefully. Be sure you

understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.

2.Be sure to keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are requested to contact the dealer from whom you purchased the product for assistance the event that you have any questions which cannot be answered herein.

3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

4.Do not lend or rent your machine without the owner's manual.

5.Be sure that anyone using your unit understands the information contained in this manual.

6.Never let a child under 13 years old

use the machine.

7. DO NOT use flammables in the sprayer. They can ignite ore xplode causing serious injury.

8.Always wear splash goggles and

protective gear and clothing when filling, using and/or cleaning the sprayer.

9.Oil the rubber cap gasket prior to first usage so the

gasket will seal properly.

10.Tighten all connections before using the sprayer. Some may not he properly secured and must be tightened to prevent leakage.

WARNING

BEFORE USING:

Oil cap gasket, oil check valve, and maintain breather hole clear of debris. Your failure to oil and to clean check valve, and to maintain breather hole open to allow air into tank, can cause tank to collapse and crack due to vacuum created by the pump.

■WORKING CONDITION

1. Refrain from operating the sprayer if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication.

2. To reduce the risk of injury when filling, using and/or cleaning the sprayer, always wear eye protection. Eye protection should meet the requirements of ANSI Z87.1.

3.Always wear a mask or respirator when filling, using and cleaning sprayer, if

recommended by the spray material manufacturer.

4.Wear protective gear and clothing when filling, using and cleaning the sprayer.

3