Maintenance, Storage, Disposal | Zenoah BM40S specification

8. Maintenance

WARNING

Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you).

Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter-clockwise. The pump handle has two locking positions, one turning clockwise and one counter- clockwise.

1.Remove cap and pour out remaining solution, then rinse all parts thoroughly with clean water.

2.Add 1/2 gallon of fresh water in tank. Pressurize, and flush pumping system by depressing trigger for at least two minutes; then drain all remaining water.

•Periodically re-grease lid gasket as well as lid vent and pump cylinder, where applicable.

•To ensure good performance, keep lid vent free of obstruction. Before and after each use, make sure all connections are well tightened. Service and replace worn parts as required.

NOTE

Failure to follow manufacturer's recommendation of use and care of unit will void any expressed or implied warranty. Do not use chlorine or clorox. It will permanently damage pump system.

NOTE

In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

■SPRYAER MAINTENANCE TABLE

		Dayly
System/Compornent	Procedure	or
		Before Use	After Use

Lid Gasket	Grease	✓

Lid Vent	Inspect/Clean	✓

Pump	Grease	✓

Connection	Inspect/Tight	✓

Whole unit	Wash/inspect		✓

9. Storage

WARNING

Never store chemicals in your sprayer for any length of time

1.Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter- clockwise. The pump handle has two locking positions, one turning clockwise and one counter-clockwise.

2.Remove cap and pour out remaining solution, then rinse all parts thoroughly with clean water.

3.Add 1/2 gallon of fresh water in tank. Pressurize, and flush pumping system by depressing trigger for at least two minutes; then drain all remaining water.

4.Always store tank clean and empty in a dry, shaded location.

10. Disposal

When disposing your machine, or chemical, be sure to allow your local regulations.

BM40S specifications

The Zenoah BM40S is a powerful and versatile petrol engine designed primarily for various outdoor power equipment. Renowned for its reliability and performance, the BM40S is particularly favored among professionals and enthusiasts in landscaping and gardening.

One of the distinctive features of the Zenoah BM40S is its lightweight design, which allows for easy handling without compromising on power. The engine boasts a displacement of 40cc, providing an impressive output that makes it suitable for a wide range of applications. This balance of power and weight enhances user comfort, allowing for extended use during demanding tasks.

The BM40S incorporates advanced technologies that set it apart from competitors. It employs a sophisticated ignition system that ensures reliable starting and stable performance, even in challenging weather conditions. Users can expect smooth acceleration and consistent power delivery, making it ideal for both professional landscapers and DIY enthusiasts.

Another notable characteristic of the Zenoah BM40S is its fuel efficiency. The engine is optimized to provide longer operational times while minimizing fuel consumption. This not only reduces operational costs but also contributes to a more environmentally friendly performance, which is becoming increasingly important in today’s eco-conscious market.

Durability is a key selling point for the Zenoah BM40S. The engine is constructed with robust materials that are resistant to wear and tear, ensuring longevity and reduced maintenance needs. The enhanced cooling system plays a vital role in maintaining optimal operating temperatures, thus extending the lifespan of the engine.

Versatility is another strong aspect of the Zenoah BM40S. It is compatible with various attachments, allowing users to easily switch between different tools such as trimmers, blowers, and brush cutters. This adaptability makes it a favorite among those who require a multifunctional engine for their outdoor tasks.

In summary, the Zenoah BM40S is a well-engineered petrol engine that emphasizes power, efficiency, and durability. With its advanced technologies, user-friendly design, and compatibility with various tools, it stands out as a top choice for professionals and avid gardeners alike. Its combination of performance and practicality ensures that the Zenoah BM40S can tackle the toughest outdoor jobs with ease.