Pre-operation, Operation, HOW to Adjust the Nozzle

6. Pre-operation

NOTE

Hose clamps are not completely tight. Please tighten hose clamps prior to using.

Hose clamps are left loose to extend life of gaskets and fittings.

WARNING

Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks.

Oil check valve and maintain breather hole clear of debris. Your failure to oil may can cause the tank to collapse and crack due to vacuum created by pump lubricate with "3 and 1" oil.

IMPORTANT

Before using, oil cap gasket, felt pump washer, and check valve, and maintain breather hole clear of debris. Your failure to oil, clean check valve, and maintain breather hole open to allow air into the tank, can cause the tank to collapse and crack, due to vacuum created by pump.

1.Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter- clockwise. The pump handle has two locking positions, one turning clockwise and one counter-clockwise.

2.Remove cap.

3.A unit that has been used with herbicides should never be used to spray insecticides, unless the sprayer has been properly cleaned and all other chemicals neutralized. Failure to do this could cause you to kill plants that have been sprayed. Consult with the manufacturer of the chemicals in use to obtain proper instructions.

4.Always oil the gasket on the cap of the unit, as well as the check valve. This will extend the life of the seal and is important for obtaining a proper seal with no leaks.

5.Mix solution in a separate container, following the manufacturers’ directions.

6.Pour pre-mixed solution through strainer into tank. Reinstall cap tightly.

7.Place sprayer on back and pressurize tank by pumping approximately 5 to 15 times.

8.You will need to pump occasionally to maintain the desired spraying pressure.

9.For best results, the sprayer should be pumped every five seconds on a continuous basis. This will maintain your spraying pressure. If you do not pump, you will not have pressure to spray.

7. Operation

•Always release pressure in the pump prior to filling, cleaning, or servicing the sprayer.

•Before opening a container of pesticide or other spray material, carefully read, understand, and follow all instructions on the label.

•Do not use flammable materials in the sprayer: they can ignite and/or explode, causing serious injury.

•Never use caustic or corrosive materials in the sprayer, which could result in damage to the unit.

■HOW TO ADJUST THE NOZZLE

•To adjust nozzle, tighten cap (turn clockwise) for fine atomized spray, or loosen (turn counter-clockwise) for coarser spray or solid stream.

■HOW TO PREPARE YOUR UNIT FOR USE

•For best results, the sprayer should be pumped every 5 seconds on a continuous basis. This will maintain your spraying pressure. If you do not pump, you will not have pressure to spray.

■RECOMMENDED APPLICATIONS FOR

"LAWN AND GARDEN" OR "AGRICULTURE" USAGE.

Herbicide : Yes

Insecticides/Pesticides : Yes

Fertilizers : Yes

Chlorine (5%) : Yes, If cleaned (*)

Diesel : Yes

Wettable Powder : No

Stains & Sealers : Yes

Oil Based : Yes

Solvent-Based : Yes

Viscous : No

(*) Permanent damage will occur if sprayer is not cleaned properly after each use with Chlorine

BM40S specifications

The Zenoah BM40S is a powerful and versatile petrol engine designed primarily for various outdoor power equipment. Renowned for its reliability and performance, the BM40S is particularly favored among professionals and enthusiasts in landscaping and gardening.

One of the distinctive features of the Zenoah BM40S is its lightweight design, which allows for easy handling without compromising on power. The engine boasts a displacement of 40cc, providing an impressive output that makes it suitable for a wide range of applications. This balance of power and weight enhances user comfort, allowing for extended use during demanding tasks.

The BM40S incorporates advanced technologies that set it apart from competitors. It employs a sophisticated ignition system that ensures reliable starting and stable performance, even in challenging weather conditions. Users can expect smooth acceleration and consistent power delivery, making it ideal for both professional landscapers and DIY enthusiasts.

Another notable characteristic of the Zenoah BM40S is its fuel efficiency. The engine is optimized to provide longer operational times while minimizing fuel consumption. This not only reduces operational costs but also contributes to a more environmentally friendly performance, which is becoming increasingly important in today’s eco-conscious market.

Durability is a key selling point for the Zenoah BM40S. The engine is constructed with robust materials that are resistant to wear and tear, ensuring longevity and reduced maintenance needs. The enhanced cooling system plays a vital role in maintaining optimal operating temperatures, thus extending the lifespan of the engine.

Versatility is another strong aspect of the Zenoah BM40S. It is compatible with various attachments, allowing users to easily switch between different tools such as trimmers, blowers, and brush cutters. This adaptability makes it a favorite among those who require a multifunctional engine for their outdoor tasks.

In summary, the Zenoah BM40S is a well-engineered petrol engine that emphasizes power, efficiency, and durability. With its advanced technologies, user-friendly design, and compatibility with various tools, it stands out as a top choice for professionals and avid gardeners alike. Its combination of performance and practicality ensures that the Zenoah BM40S can tackle the toughest outdoor jobs with ease.