Zenoah BC4500DW owner manual Montaje

Page 4

 

English

 

Español

 

 

3. Setup

 

3. Montaje

F3-1

F3-2

F3-3

F3-4

F3-5

F3-6

F3-7

■ENGINE

Using attached 4 socket screws, secure the connection firmly with equal force.

■HANDLE

1.Remove the upper cap from the bracket.

2.Loosen the 4 bolts on the clamp and insert the handles equally. Retighten the bolts.

3.Put the handle assembly into the bracket and put the upper cap over it. Tighten the cap securely.

■CONNECTING THROTTLE WIRE 1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the joint on the top of the carburetor.

■PROTECTOR

Wrap the protector around the outer pipe as shown in the figure, and fasten the magic fastener.

■BLADE GUARD

Attach the guard on the outer pipe. Fix it with 2 bolts.

■BLADE

1.Put the angled bar(1) into the side holes of the inner holder and the gearcase.

2.Remove the nut (Lefthanded) and the outer holder(3) from the gearshaft.

3.Put the blade onto the inner holder(2). Make the marked side face the holder.

4.Put the outer holder(3) onto the gearshaft making the recessed side face the blade.

5.Fasten the blade by the nut and the cover(4).

[Tightening torque]

14.7 to 19.6 N·m (150 to 200 kg·cm)

■MOTOR

Utilizando los 4 tornillos insertados, asegure la conexión firmemente con la misma fuerza.

■MANGO

1.Retire la tapa superior del soporte.

2.Afloje los 4 tornillos de la abrazadera e inserte los mangos uniformemente. Apriete los tornillos.

3.Coloque el ensamble del mango en el soporte y coloque la tapa superior sobre éste. Apriete la tapa firmemente.

■CONEXIÓN DEL ALAMBRE DEL ACELERADOR

1. Retire la cubierta del filtro de aire.

2. Conecte el extremo del alambre del acelerador a la junta situada en la parte superior del carburador.

■PROTECTOR

Envuelva el protector alrededor del tubo como se muestra en la figura y apriete el sujetador.

■PROTECTOR DEL UTENCILIO DE CORTE

Coloque el protector en el tubo externo. Fíjelo con 2 tornillos.

■CUCHILLA

1.Coloque la barra angulada (1) en los orificios laterales del soporte interior y la caja de engranajes.

2.Retire la tuerca (a mano izquierda) y el soporte exterior (3) del eje.

3.Coloque la cuchilla en el soporte interior (2). Haga que la cara lateral marcada se encuentre de frente con el soporte.

4.Coloque el soporte exterior (3) en el eje de engranajes haciendo que la cara lateral cóncava se encuentre de frente a la cuchilla.

5.Apriete la cuchilla con la tuerca y la tapa (4).

[Par de torsión]

14.7 to 19.6 N·m (150 to 200 kg·cm)

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents BC4500DW For safe operation Para un Funcionamiento Seguro Be sure the blade guard is attached in placeDamaged in any way Instructions on stopping a coasting blade ContragolpeMontaje Advertencia Fuel CombustibleNota Use Funcionamiento When using a metal blade Use FuncionamientoNut loose F5-7 FlojaMaintenance Mantenimiento Maintenance Before Storage Mantenimiento Antes DEL AlmacenamientoSpecifications Model CodeEspecificaciones Modelo

BC4500DW specifications

The Zenoah BC4500DW is a high-performance brush cutter designed for both professional and demanding home-use applications. Engineered to handle tough cutting tasks, this versatile machine is perfect for clearing thick grass, weeds, and even small brush. With its robust construction and powerful features, the BC4500DW stands out in the competitive world of outdoor power equipment.

One of the primary features of the Zenoah BC4500DW is its powerful, advanced two-stroke engine. This engine is known for its efficiency and longevity, delivering impressive torque and power suitable for challenging conditions. The BC4500DW's engine is designed to provide excellent cutting performance without sacrificing fuel efficiency, making it an eco-friendly choice for users who want to reduce their environmental impact.

The brush cutter is equipped with a unique anti-vibration system that helps minimize fatigue during extended usage. This technology significantly enhances user comfort, allowing operators to work for longer periods without experiencing discomfort in their hands and arms. The ergonomic design of the handle further complements this feature, providing a secure grip and ease of maneuverability.

Another notable characteristic of the Zenoah BC4500DW is its versatile cutting attachment system. Users can easily switch between a variety of cutting heads, including a trimmer head for grass and a heavy-duty blade for thicker vegetation. This adaptability makes it a valuable tool for various tasks, whether manicuring a lawn or tackling overgrown areas.

The lightweight design of the unit allows for easy handling and transport, reducing user fatigue. Despite its lighter weight, the BC4500DW is built with durable materials that ensure its longevity under rigorous use in the field.

With a built-in fuel primer and easy-to-access air filter, maintenance of the Zenoah BC4500DW is straightforward. The user-friendly design ensures that operators can keep the machine in optimal working condition with minimal effort.

In conclusion, the Zenoah BC4500DW stands as a reliable and efficient brush cutter ideal for both professionals and homeowners. With its powerful engine, ergonomic design, advanced anti-vibration technology, and versatile cutting capabilities, this machine is a prime choice for anyone looking to maintain their outdoor spaces effectively. Its durability and easy maintenance further enhance its attractiveness, making it a solid investment for anyone in need of a high-performing brush cutter.
Top Page Image Contents