Zenoah BKZ4505DL Troubleshooting guide, Disposal, Limited warranty, Check Probable Causes Action

Page 18

BKZ4505DL / BKZ5010DL

11. Troubleshooting guide

Case 1. Starting failure

 

 

 

CHECK

PROBABLE CAUSES

ACTION

 

fuel tank

incorrect fuel

drain it and use correct fuel

 

fuel filter

fuel filter is clogged

clean

 

carburetor adjustment screw

out of normal range

adjust to normal range

 

sparking (no spark)

spark plug is fouled/wet

clean/dry

 

 

plug gap is incorrect

correct (GAP: 0.6 ~ 0.7 mm)

 

spark plug

disconnected

retighten

Case 2. Engine starts but does not keep running/hard re-starting

 

 

CHECK

PROBABLE CAUSES

ACTION

 

fuel tank

incorrect fuel or staled fuel

drain it and use correct fuel

 

carburetor adjustment screw

out of normal range

adjust to normal range

 

muffler, cylinder (exhaust port)

carbon is built-up

consult with the repair specialty store

 

air cleaner

clogged with dust

air blow or wash

 

cylinder fin, fan cover

clogged with dust

consult with the repair specialty store

When your unit seems to need further service, please consult with our ZENOAH service shop in your area.

12. Disposal

When you dispose of the machine, do not disas- semble the machine.

When you dispose of the machine, fuel, oil, be sure to follow your local regulations.

Limited warranty

Should any failure occur on the product under normal oper- ating conditions within the applicable warranty period, the failed part will be replaced or repaired free of charge by a ZENOAH authorized dealer.

WARRANTY PERIOD: 1 year (6 months if used profession- ally, and 30 days if used for rental purpose) from the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE ZENOAH DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAG- NOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAG- NOSTIC WORK IS PERFORMED AT THE ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERA- TOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF REPAIR OR “REPLACE AS NECESSARY” SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WAR- RANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED RE- PLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PER- FORMANCE AND DULABILITY MAY BE USED IN NON-WAR- RANTY MAINTENANCE OR REPAIRS, AND SHALL NOT RE-

DUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER EN- GINE COMPONENTS CAUSED BY THE FAILURE OF A WAR- RANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF IN- STRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS ACCIDENT MISHANDLING, ALTERATION, ABUSE, IM- PROPER LUBRICATION, USE OF ANY PARTS OR ACCES- SORIES OTHER THAN THOSE SPECIFIED BY THE COM- PANY, OR OTHER CAUSES BEYOND THE COMPANY’S CON- TROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS RE- PLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE ORIGI- NAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EX- CLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION, PLEASE C A L L Y O U R N E A R E S T S E R V I C E C E N T E R , OR CHECK PLEASE ZENOAH WEB SITE http://www.zenoah.net

GB-18

Image 18
Contents BKZ4505DL BKZ5010DL GB-1GB-2 EC Declaration of ConformityWear head, eye and ear protection Contents Parts locationModel SpecificationSymbols on the machine BKZ4505DL BKZ5010DLWorking Circumstance For safe operationWorking Condition Working PlanArea within a perimeter Using the ProductBefore Starting Engine Starting the EngineHandling Fuel MaintenanceIf Someone Comes TransportationSet up Installing Blade Installing HandleInstalling Cutting Attachment Guard Installing Trimmer HeadFuel Cutting head will start rotating upon the en- gine starts OperationStarting Engine Stopping EngineCutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Putting on the UnitCutting Work Trimmer Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsEvery System/components Procedure Before 100 MaintenanceAdjusting the Line Length BladeAIR Filter Replacement Plug is a NGK CMR7HRefilling Trimming Line Fuel FilterAngle Transmission Periodical Service Points 1. Cylinder FinsStorage Intake AIR Cooling VentDisposal Troubleshooting guideLimited warranty Check Probable Causes Action