Zenoah BKZ5010DL, BKZ4505DL owner manual Wear head, eye and ear protection

Page 3

BKZ4505DL / BKZ5010DL

EXPLANATION OF SYMBOLS AND SAFETY WARNINGS

BKZ4505DL

WARNING!!!

RISK OF DAMAGING HEARING

Wear head, eye and ear protection.

BKZ5010DL

WARNING!!!

RISK OF DAMAGING HEARING

Wear head, eye and ear protection.

 

MODEL

 

SOUND LEVEL1)

VIBRATION LEVEL2)

 

 

 

 

ISO 22868

ISO 22867

 

 

 

LpAeq

 

LwA(guaranteed)

ahv,eq

BKZ4505DL

Blade

45.2 cm3

97 dB(A)

 

116 dB(A)

4.3 m/s2

BKZ4505DL

Trimmer head

45.2 cm3

96 dB(A)

 

116 dB(A)

5.1 m/s2

BKZ5010DL

Blade

50.6 cm3

99 dB(A)

 

122 dB(A)

4.2 m/s2

BKZ5010DL

Trimmer head

50.6 cm3

97 dB(A)

 

122 dB(A)

4.5 m/s2

* Specifications are subject to change without notice

1)Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Reported soundpower level for the machine has been measured with the original cutting attachment that gives the highest level.

The difference between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement result and the variations between different machines of the same model according to Directive 2000/14/EC.

Reported data for equivalent sound pressure level (LpAeq) at the operator’s ear for the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).

2)Reported data for equivalent vibration level (ahv,eq) at the control handle has a typical statistical dispersion (standard deviation) of 1 m/s2.

APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION

DIRECTIVE 97/68/EC AMENDED 2002/88/EC

BKZ4505DL : e13*97/68SH2G3*2002/88*0097*04

BKZ5010DL : e13*97/68SH3G3*2002/88*0622*02

G B

GB-3

Image 3
Contents GB-1 BKZ4505DL BKZ5010DLEC Declaration of Conformity GB-2Wear head, eye and ear protection Parts location ContentsBKZ4505DL BKZ5010DL SpecificationSymbols on the machine ModelWorking Plan For safe operationWorking Condition Working CircumstanceStarting the Engine Using the ProductBefore Starting Engine Area within a perimeterTransportation MaintenanceIf Someone Comes Handling FuelSet up Installing Trimmer Head Installing HandleInstalling Cutting Attachment Guard Installing BladeFuel Stopping Engine OperationStarting Engine Cutting head will start rotating upon the en- gine startsPutting on the Unit Adjusting Throttle CableAdjusting Idling Speed Cutter Application ChartTrimming Grass and Weeds Cutting MethodControlling Blade Bounce Cutting Work Trimmer Head UsageBlade MaintenanceAdjusting the Line Length Every System/components Procedure Before 100Fuel Filter Replacement Plug is a NGK CMR7HRefilling Trimming Line AIR FilterIntake AIR Cooling Vent Periodical Service Points 1. Cylinder FinsStorage Angle TransmissionCheck Probable Causes Action Troubleshooting guideLimited warranty Disposal