Zenoah BK3410FL-S, BK4310FL-S owner manual Trouble shooting, Disposal

Page 21

9. Trouble shooting

PHENOMENON

MAIN CAUSE

MEASURES

 

 

 

The engine does not start.

• Bad fuel (different quality, deterioration)

• Replace it with normal fuel (page 12).

 

 

 

 

• Excessive sucking of fuel

• Open the choke, open the throttle full

 

 

open, and pull out the rope repeatedly

 

 

(page 13,14).

 

 

 

 

• Clogging of the muffler exhaust vent

• Clean the muffler (page 18,19).

 

 

 

 

• Contamination of the spark plug electrodes,

• Clean the electrodes or replace the plug

 

Short-circuit or breaking of a wire

(page 18).

 

 

 

The engine does not accelerate.

• Bad fuel (different quality, deterioration)

• Replace it with normal fuel (page 12).

 

 

 

 

• Clogging of the muffler exhaust vent

• Clean the muffler (page 19).

 

 

 

The engine stalls when the throttle

• The idling revolution speed is too low.

• Readjust the idling adjustment screw

is returned to its original position.

 

(page 20).

 

 

 

The engine rotation speed changes.

• Clogging of the fuel filter

• Clean or replace the fuel filter (page 18).

 

 

 

Abnormal vibration

• Deformation or damage of the blade

• Replace the blade (page 11).

 

 

 

Deterioration of fuel consumption

• Clogging of the air cleaner

• Clean the air cleaner (page 17).

 

 

 

 

• Blunt blade

• Replace the blade (page 11).

 

 

 

 

• Bad lubrication of the flexible shaft

• Supply grease (page 19).

 

 

 

When the symptoms in the left column do not improve after taking the measures in the right column, please contact the shop where you bought this product.

For the measures marked with , please buy ZENOAH’s genuine parts at the shop where you bought this product.

WARNING

Do not modify or disassemble the machine. Modification or disassembly of the machine might cause the machine to be damaged during operation, or cause an unexpected accident due to the leakage of fuel or malfunction of the machine.

When you carry out inspection or maintenance of the machine, keep the machine clear of fire (such as a lit cigarette). Otherwise, the fuel might catch fire.

Use ZENOAH’s genuine or dedicated tightening parts (bolts, nuts and screws). Use of other manufacturers’ parts might damage the machine, or cause an unexpected accident due to parts falling off while the machine is in operation.

10. Disposal

When you dispose of the machine, do not disassemble the machine.

When you dispose of the machine, fuel, oil, be sure to follow your local regulations.

21

Image 21
Contents BK3410FL / BK3410FL-S Contents 15m 50ft Specifications Symbols on the machinePosition AIR Cleaner Cover Position Fuel Tank CAPWorking Condition Safety precautionsWorking Circumstance Working PlanUsing the Product Before Starting the EngineStarting the Engine If Someone Comes MaintenanceHandling Fuel TransportationHow you can maintain the best control How you can reduce the chance of blade thrustSet up SE6 Adjusting Throttle CableSE8 Attaching the Debris GuardSE10 Bar Holder B Holder a SE13 Arbor bolt Holder B Holder aSE12 Rotating direction Mixing ratios FuelRefueling OperationOP1 Tank capStopping the Engine OP2OP3 OP5Cutting Operation OP6 OP8Blade Usage OP7 OP7Adjusting the Line Length AIR Cleaner MaintenanceMA1 Refilling Trimming Line MA2 MA2MA5 Fuel FilterAIR Cooling Vent MA4Adjusting the Engine Maintenance Every 100 HoursMA7 Flexible ShaftMA12 Tank cap Fuel tank Maintenance Before LONG-TERM StorageDisposal Trouble shootingWarranty does not Apply to Those Limited warrantyPage Zenoah