Zenoah BCZ4000DL owner manual Refilling Trimming Line, Blade, AIR Filter, Fuel Filter, Spark Plug

Page 14

BCZ4000DL / BCZ4000DW / BCZ4200CL

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

•For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

BLADE

•Check the blade and the fasteners for looseness, cracking, or bending.

•Check the cutting edges and reform with a flat file.

Point :

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

•It is recommended that filing should be done by professionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

WARNING

•Make sure that the engine has stopped and is cool be- fore performing any service to the machine. Contact with moving cutting head or hot muffler may result in a per- sonal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine performance.

•Filter element : Check and clean the filter element in warm, soapy water as required. Dry completely before installing.

•Paper element : Check and clean the paper element by air blow as required.

•If the element is broken or shrunk, replace with a new one.

(2)(1)

(1) Filter element

(2) Paper element

WARNING

•This filter element is dry type.

•Never wash the filter element in oleaginous cleaning solu- tion.

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1)

SPARK PLUG

• Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type specified by ZENOAH.

GB-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BCZ4000DL BCZ4000DW BCZ4200CL Saitama, Japan 1st December Wear head, eye and ear protectionContents Parts locationModel SpecificationSymbols on the machine BCZ4000DL BCZ4000DW BCZ4200CLWorking Circumstance For safe operationWorking Condition Working PlanStarting the Engine Using the ProductBefore Starting Engine Handling Fuel MaintenanceIf Someone Comes TransportationSet up Fuel Cutting head will start rotating upon the en- gine starts OperationStarting Engine Stopping EngineCutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Metal Blade UsageCutting Work Line Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsMaintenance Adjusting the Line LengthAIR Filter Refilling Trimming LineBlade Fuel FilterStorage DisposalCheck Probable Causes Action Troubleshooting guideLimited warranty

BCZ4000DL specifications

The Zenoah BCZ4000DL is a remarkable addition to the world of outdoor power equipment, specifically designed for those who require efficiency and reliability in their brush cutting tasks. As part of Zenoah's esteemed lineup, the BCZ4000DL utilizes cutting-edge technologies to deliver performance that is unmatched in its category.

At the heart of the BCZ4000DL is its powerful 40cc two-stroke engine, which offers a robust power-to-weight ratio. This engine has been engineered for optimal efficiency, ensuring that users can tackle the toughest tasks without being weighed down by excessive bulk. The engine is designed with advanced ignition technology, promoting easy starting and consistent performance, even in cold conditions.

One of the standout features of the BCZ4000DL is its ergonomic design. The adjustable handle gives users the ability to customize their grip for enhanced comfort, significantly reducing fatigue during prolonged use. The unit also boasts a lightweight construction, which promotes easier maneuverability, making it an excellent choice for both professional landscapers and homeowners alike.

User convenience is further enhanced through the inclusion of a low-vibration system, which minimizes the amount of vibration transmitted to the user’s hands. This feature not only improves comfort but also allows for more precise control while cutting, contributing to cleaner and more efficient results.

The BCZ4000DL is equipped with a high-capacity fuel tank, allowing for longer operating times between refueling. This is especially valuable for larger jobs where downtime for refueling can interrupt workflow. Additionally, the model incorporates a heavy-duty cutting head that is capable of handling various types of vegetation, from tough weeds to thicker brush, making it versatile for a range of applications.

To ensure durability and longevity, the BCZ4000DL features high-quality construction materials that can withstand rigorous use in various environmental conditions. Coupled with Zenoah's commitment to sustainability, this model is designed to reduce emissions without compromising power or efficiency.

In summary, the Zenoah BCZ4000DL stands out for its powerful engine, ergonomic design, low-vibration technology, and high-capacity fuel system. This combination of features makes it an ideal choice for anyone seeking a reliable and efficient brush cutter for demanding tasks in both professional and residential settings. With the BCZ4000DL, users can take on their outdoor challenges with confidence, knowing they have a quality tool in hand.
Top Page Image Contents