If Someone Comes, Maintenance, Handling Fuel

BCZ4000DL / BCZ4000DW / BCZ4200CL

5. For safe operation

•IF SOMEONE COMES

1.Guard against hazardous situa- tions at all times. Warn adults to keep pets and children away from the area. Be careful if you are ap- proached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the en- gine and disconnect the spark

plug wire before performing any maintenance or checking proce- dures.

WARNING

The metallic parts reach high tem- peratures immediately after stop- ping the engine.

3. When replacing the cutting at- tachment or any other part, or when replacing the oil or any lu- bricant, always be sure to use

only ZENOAH products or products which have been cer- tified by ZENOAH for use with the ZENOAH product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest ZENOAH authorized servicing dealer for assistance.

5.Do not use any accessory or at- tachment other than those bear- ing the ZENOAH mark and rec- ommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product be- coming damaged during opera- tion or the product becoming un- able to operate properly.

HANDLING FUEL

1. The engine of the ZENOAH prod-
uct is designed to run on a mixed
fuel, which contains highly flam-
mable gasoline. Never store cans	G
of fuel or refill the tank of the unit	B
in any place where there is a
boiler, stove, wood fire, electrical
sparks, welding sparks, or any
other source of heat or fire which
might ignite the fuel.
2. Never smoke while operating the
unit or refilling its fuel tank.
3. When refilling the tank, always
turn off the engine and allow it to
cool down. Take a careful look
around to make sure that there are
no sparks or open flames any-
where nearby before refueling.

4.Wipe spilled fuel completely us- ing a dry rag if any fuel spillage

occurs during refueling.

5. After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 3 m or more away from where it was refueled before turning on the en- gine.

TRANSPORTATION

1.When hand-carrying the product, cover over the cutting part if nec- essary, lift up the product and carry it paying attention to the blade.

2.Never transport the product over

rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank dur- ing transport.

GB-7

BCZ4000DL specifications

The Zenoah BCZ4000DL is a remarkable addition to the world of outdoor power equipment, specifically designed for those who require efficiency and reliability in their brush cutting tasks. As part of Zenoah's esteemed lineup, the BCZ4000DL utilizes cutting-edge technologies to deliver performance that is unmatched in its category.

At the heart of the BCZ4000DL is its powerful 40cc two-stroke engine, which offers a robust power-to-weight ratio. This engine has been engineered for optimal efficiency, ensuring that users can tackle the toughest tasks without being weighed down by excessive bulk. The engine is designed with advanced ignition technology, promoting easy starting and consistent performance, even in cold conditions.

One of the standout features of the BCZ4000DL is its ergonomic design. The adjustable handle gives users the ability to customize their grip for enhanced comfort, significantly reducing fatigue during prolonged use. The unit also boasts a lightweight construction, which promotes easier maneuverability, making it an excellent choice for both professional landscapers and homeowners alike.

User convenience is further enhanced through the inclusion of a low-vibration system, which minimizes the amount of vibration transmitted to the user’s hands. This feature not only improves comfort but also allows for more precise control while cutting, contributing to cleaner and more efficient results.

The BCZ4000DL is equipped with a high-capacity fuel tank, allowing for longer operating times between refueling. This is especially valuable for larger jobs where downtime for refueling can interrupt workflow. Additionally, the model incorporates a heavy-duty cutting head that is capable of handling various types of vegetation, from tough weeds to thicker brush, making it versatile for a range of applications.

To ensure durability and longevity, the BCZ4000DL features high-quality construction materials that can withstand rigorous use in various environmental conditions. Coupled with Zenoah's commitment to sustainability, this model is designed to reduce emissions without compromising power or efficiency.

In summary, the Zenoah BCZ4000DL stands out for its powerful engine, ergonomic design, low-vibration technology, and high-capacity fuel system. This combination of features makes it an ideal choice for anyone seeking a reliable and efficient brush cutter for demanding tasks in both professional and residential settings. With the BCZ4000DL, users can take on their outdoor challenges with confidence, knowing they have a quality tool in hand.