Zenoah BCZ3200DW owner manual Operation, Starting Engine, Stopping Engine

Page 10

BCZ3200DL / BCZ3200DW

8. Operation

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer several times until overflown fuel flows out in the clear tube.

4. Move the choke lever to the closed position.

 

(1)

 

 

(2)

(1) choke lever

 

 

 

 

(2) close

 

(3) (3) open

[BCZ3200DL]

 

[BCZ3200DW]

(3)

1

(3)

 

START

 

 

2

(3) Stop switch

 

5. [BCZ3200DL] Set the stop switch to the “I” posi- tion. Set the throttle trigger to the start position (1 → 2

→3).

Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it. [BCZ3200DW] Set the stop switch to the “RUN” po- sition. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.

6. While holding the unit firmly, pull out the starter rope quickly until engine fires.

WARNING

The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to ro- tate as soon as the engine is started by putting the throttle trigger into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to en- sure that neither the cutting part nor the throttle trig- ger come into contact with any obstacle when the engine starts.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. And restart engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

[BCZ3200DL][BCZ3200DW]

(3)

(3)

START

(3)Stop switch

1.Release the throttle trigger and run the engine for half a minute.

2.Shift the stop switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine

while pulling the throttle trigger.

GB-10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents BCZ3200DL BCZ3200DW Explanation of Symbols and Safety Warnings Contents Parts locationBCZ3200DL / BCZ3200DW SpecificationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanBefore Starting Engine Using the ProductStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationSet up Fuel Starting Engine OperationStopping Engine Cutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Metal Blade UsageCutting Work Line Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsAdjusting the Line Length MaintenancePoint AIR Filter Replacement Plug is a NGK CMR7HRefilling Trimming Line Fuel FilterStorage DisposalLimited warranty Troubleshooting guideCheck Probable Causes Action

BCZ3200DW specifications

The Zenoah BCZ3200DW is a lightweight and versatile brush cutter designed for both professional landscapers and home gardening enthusiasts. Boasting a robust engine, this model is particularly revered for its performance, durability, and user-centric design. One of the standout features of the BCZ3200DW is its powerful 32cc two-stroke engine, which provides strong cutting power while ensuring efficient fuel consumption. This balance between power and efficiency makes it ideal for extended use, allowing users to tackle thick vegetation and overgrown areas with ease.

One of the innovative technologies incorporated in the Zenoah BCZ3200DW is the Easy Start System. This feature simplifies the starting process, allowing users to start the machine with minimal effort, particularly beneficial for those who may have difficulty with traditional pull-start mechanisms. The ergonomic design of the brush cutter also contributes to its user-friendliness. It comes equipped with a comfortable harness and adjustable handle design, which helps reduce operator fatigue during prolonged use.

In terms of versatility, the BCZ3200DW supports a range of attachments, enabling users to switch between tasks quickly. From trimming and edging to more demanding clearing applications, this brush cutter can be adapted to meet various lawn and garden maintenance needs. The machine’s dual-line cutting head is designed for optimal performance, featuring easy line replacement to minimize downtime.

The aluminum boom construction further enhances the durability of the Zenoah BCZ3200DW, ensuring it withstands rigorous use over the years. Its lightweight design, combined with a well-balanced structure, allows for easier maneuverability in tight spaces, making it a favorite among gardeners looking for both power and convenience.

Additionally, the vibration dampening technology integrated into the BCZ3200DW significantly reduces operator fatigue, allowing users to work longer without discomfort. The overall build quality of this brush cutter ensures it remains a reliable tool for both hobbyists and professionals alike, combining advanced technology with thoughtful design elements. With its blend of power, efficiency, and user-friendly features, the Zenoah BCZ3200DW stands out as an excellent choice for anyone looking to enhance their gardening and landscaping efforts.
Top Page Image Contents