Storage, Disposal | Zenoah BCZ3200DW manual

9. Maintenance

MUFFLER

WARNING

•Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leak- age is found, stop using the machine and have it re- paired immediately.

•Note that failing to do so may result in the engine catching on fire.

SPARK ARRESTER

•The muffler is equipped with a spark arrester to pre- vent red hot carbon from flying out of the exhaust out- let. Periodically inspect and clean as necessary with a wire brush.

(1)Spark arrester

(1)

ANGLE TRANSMISSION

•The reduction gears are lubricated by multipurpose, lithium-based grease in the angle transmission. Sup- ply new grease every 25 hours of use or more often depending on the job condition.

•Remove the bolt opposit to the grease nipple before installing new grease to arrange for old grease to exit.

INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muf- fler to become overheated and that in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note

BCZ3200DL / BCZ3200DW

that it is necessary to remove the engine cover shown in in order to be able to view the upper part of the cylinder.

IMPORTANT		G
• If waste gets stuck and causes blockage around the		B
intake air cooling vent or between the cylinder fins, it
may cause the engine to overheat, and that in turn
may cause mechanical failure on the part of the
brushcutter.
(1)	Cylinder
(2)	Intake air cooling vent

PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has, wipe it away using oil-free, lead-free gasoline.

10. Storage

Aged fuel is one of major causes of engine starting fail- ure. Before storing the unit, empty the fuel tank and run the engine until it uses all the fuel left in the fuel line and the carburetor. Store the unit indoor taking necessary measures for rust prevention.

11. Disposal

When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

GB-15

BCZ3200DW specifications

The Zenoah BCZ3200DW is a lightweight and versatile brush cutter designed for both professional landscapers and home gardening enthusiasts. Boasting a robust engine, this model is particularly revered for its performance, durability, and user-centric design. One of the standout features of the BCZ3200DW is its powerful 32cc two-stroke engine, which provides strong cutting power while ensuring efficient fuel consumption. This balance between power and efficiency makes it ideal for extended use, allowing users to tackle thick vegetation and overgrown areas with ease.

One of the innovative technologies incorporated in the Zenoah BCZ3200DW is the Easy Start System. This feature simplifies the starting process, allowing users to start the machine with minimal effort, particularly beneficial for those who may have difficulty with traditional pull-start mechanisms. The ergonomic design of the brush cutter also contributes to its user-friendliness. It comes equipped with a comfortable harness and adjustable handle design, which helps reduce operator fatigue during prolonged use.

In terms of versatility, the BCZ3200DW supports a range of attachments, enabling users to switch between tasks quickly. From trimming and edging to more demanding clearing applications, this brush cutter can be adapted to meet various lawn and garden maintenance needs. The machine’s dual-line cutting head is designed for optimal performance, featuring easy line replacement to minimize downtime.

The aluminum boom construction further enhances the durability of the Zenoah BCZ3200DW, ensuring it withstands rigorous use over the years. Its lightweight design, combined with a well-balanced structure, allows for easier maneuverability in tight spaces, making it a favorite among gardeners looking for both power and convenience.

Additionally, the vibration dampening technology integrated into the BCZ3200DW significantly reduces operator fatigue, allowing users to work longer without discomfort. The overall build quality of this brush cutter ensures it remains a reliable tool for both hobbyists and professionals alike, combining advanced technology with thoughtful design elements. With its blend of power, efficiency, and user-friendly features, the Zenoah BCZ3200DW stands out as an excellent choice for anyone looking to enhance their gardening and landscaping efforts.