Zenoah BCZ3200DW owner manual Refilling Trimming Line, AIR Filter, Fuel Filter, Spark Plug

Page 14

BCZ3200DL / BCZ3200DW

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

• For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine perfor- mance. Check and clean the filter element in warm, soapy water as required. Dry completely before in- stalling. If the element is broken or shrunk, replace with a new one.

(1) Air filter

(1)

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1)

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

KOMATSU ZENOAH.

0.6-0.7 mm

•REPLACEMENT PLUG IS A NGK CMR7H.

IMPORTANT

•Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

9.8-11.8 N.m.

TIGHTENING TORQUE: (1~1.2 kgm)

GB-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BCZ3200DL BCZ3200DW Explanation of Symbols and Safety Warnings Contents Parts locationBCZ3200DL / BCZ3200DW SpecificationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanStarting the Engine Using the ProductBefore Starting Engine Handling Fuel MaintenanceIf Someone Comes TransportationSet up Fuel Stopping Engine OperationStarting Engine Cutter Application Chart Adjusting Throttle CableAdjusting Idling Speed Metal Blade UsageCutting Work Line Head Usage Cutting MethodControlling Blade Bounce Trimming Grass and WeedsPoint MaintenanceAdjusting the Line Length AIR Filter Replacement Plug is a NGK CMR7HRefilling Trimming Line Fuel FilterStorage DisposalCheck Probable Causes Action Troubleshooting guideLimited warranty

BCZ3200DW specifications

The Zenoah BCZ3200DW is a lightweight and versatile brush cutter designed for both professional landscapers and home gardening enthusiasts. Boasting a robust engine, this model is particularly revered for its performance, durability, and user-centric design. One of the standout features of the BCZ3200DW is its powerful 32cc two-stroke engine, which provides strong cutting power while ensuring efficient fuel consumption. This balance between power and efficiency makes it ideal for extended use, allowing users to tackle thick vegetation and overgrown areas with ease.

One of the innovative technologies incorporated in the Zenoah BCZ3200DW is the Easy Start System. This feature simplifies the starting process, allowing users to start the machine with minimal effort, particularly beneficial for those who may have difficulty with traditional pull-start mechanisms. The ergonomic design of the brush cutter also contributes to its user-friendliness. It comes equipped with a comfortable harness and adjustable handle design, which helps reduce operator fatigue during prolonged use.

In terms of versatility, the BCZ3200DW supports a range of attachments, enabling users to switch between tasks quickly. From trimming and edging to more demanding clearing applications, this brush cutter can be adapted to meet various lawn and garden maintenance needs. The machine’s dual-line cutting head is designed for optimal performance, featuring easy line replacement to minimize downtime.

The aluminum boom construction further enhances the durability of the Zenoah BCZ3200DW, ensuring it withstands rigorous use over the years. Its lightweight design, combined with a well-balanced structure, allows for easier maneuverability in tight spaces, making it a favorite among gardeners looking for both power and convenience.

Additionally, the vibration dampening technology integrated into the BCZ3200DW significantly reduces operator fatigue, allowing users to work longer without discomfort. The overall build quality of this brush cutter ensures it remains a reliable tool for both hobbyists and professionals alike, combining advanced technology with thoughtful design elements. With its blend of power, efficiency, and user-friendly features, the Zenoah BCZ3200DW stands out as an excellent choice for anyone looking to enhance their gardening and landscaping efforts.
Top Page Image Contents