Zenoah TR2002 owner manual Maintenance, AIR Filter, Fuel Filter

Page 13

 

 

 

 

 

 

 

BC2003 / TR2002

 

9. Maintenance

 

 

 

 

 

 

 

 

 

 

Every

Every

Every

 

 

 

System/components

Procedure

Before

25

50

100

Note

 

 

use

hours

hours

hours

 

 

 

 

 

 

 

 

 

 

after

after

after

 

 

 

fuel leaks, fuel spillage

wipe out

 

 

 

replace, if necessary

G

 

fuel tank, air filter, fuel filter

inspect/clean

 

 

B

ENGINE

 

see adjusting

 

 

 

 

replace carburetor

spark plug

 

 

 

 

idle adjusting screw

idling speed

 

 

 

if necessary

 

 

 

 

 

 

 

 

 

 

clean and readjust

 

 

 

 

GAP: .025 in (0.6 ~ 0.7 mm)

 

 

 

plug gap

 

 

 

 

replace, if necessary

 

 

cylinder fins, intake air cooling vent

clean

 

 

 

 

 

 

muffler, spark arrester, cylinder exhaust port

clean

 

 

 

 

 

 

throttle lever, ignition switch

check operation

 

 

 

 

 

SHAFT

cutting parts

replace if

 

 

 

 

 

something’s wrong

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gear case

grease

 

 

 

 

 

 

screws/nuts/bolts

tighten/replace

 

 

not adjusting screws

 

 

debris guard

make sure to attach

 

 

 

 

 

WARNING

Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

The air filter, if clogged, will reduce the engine perfor- mance. Check and clean the filter element in warm, soapy water as required. Dry completely before in- stalling. If the element is broken or shrunk, replace with a new one.

FUEL FILTER

When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1) Air filter

GB-13

Image 13
Contents BC2003 TR2002 Explanation of Symbols and Safety Warnings Contents Parts location SpecificationNever modify your machine Symbols on the machineWorking Condition For safe operationWorking Circumstance Working PlanBefore Starting Engine Using the ProductStarting the Engine If Someone Comes MaintenanceHandling Fuel TransportationInstalling Handle Installing Cutting Head Set upInstalling Debris Guard Balance UnitFuel Starting Engine OperationStopping Engine Adjusting Idling Speed Adjusting Throttle CableAdjusting the Line Length Cutting Work Line Head UsageAIR Filter MaintenanceFuel Filter Spark Plug Replacement Plug is a NGK BPMR7AMuffler Gear CaseStorage Procedures to be Performed After Every 100 Hours of USERefilling Trimming Line Limited warranty Troubleshooting guideCheck Probable Causes Action

TR2002 specifications

The Zenoah TR2002 is a powerful and versatile two-stroke engine that has garnered attention within the realm of professional outdoor power equipment. Designed primarily for use in handheld tools, such as brush cutters and trimmers, this engine exemplifies a perfect blend of efficiency, performance, and user-friendliness.

One of the standout features of the Zenoah TR2002 is its lightweight design, which significantly enhances maneuverability during operation. Weighing considerably less than many competing models, the TR2002 allows users to work for extended periods without the frustrating fatigue that can be common with heavier equipment. This aspect is particularly appealing to both amateur gardeners and professional landscape contractors alike.

In terms of technology, the Zenoah TR2002 incorporates advanced two-stroke technology to deliver robust power output while maintaining impressive fuel efficiency. This engine is designed to minimize emissions, making it compliant with stringent environmental regulations. The TR2002 employs a unique scavenging system that ensures optimal fuel-air mixture, which translates to improved performance and reduced operational noise.

The durability of the Zenoah TR2002 cannot be overlooked. Constructed with high-quality materials, this engine is built to withstand the rigors of continuous fieldwork. Its robust design is complemented by an efficient cooling system that prevents overheating, which can be a common issue in high-performance engines.

Another defining characteristic of the Zenoah TR2002 is its user-friendly operation. The engine features easy starting technology, which minimizes the effort needed to kickstart the unit. Additionally, the ergonomic handle design enhances user comfort, enabling better control during use. This aspect is essential for achieving precision in landscaping tasks, where maneuverability and control are paramount.

Maintenance is also simplified with the Zenoah TR2002. It is designed for easy access to the air filter and spark plug, allowing for quick and efficient servicing. This design consideration significantly reduces downtime and keeps the machine running smoothly.

In conclusion, the Zenoah TR2002 stands out as a well-rounded engine option for those in need of a reliable and efficient power source for their outdoor tools. Its combination of lightweight design, advanced technologies, durability, and user-friendly features make it a valuable asset for both professional landscapers and gardening enthusiasts. Whether tackling tough brush or fine trimming, the TR2002 delivers the performance needed to get the job done efficiently.