If Someone Comes, Maintenance, Handling Fuel

BC2003 / TR2002

5. For safe operation

could result in serious burns or elec- trical shock.

•IF SOMEONE COMES

1.Guard against hazardous situa- tions at all times. Warn adults to keep pets and children away from the area. Be careful if you are ap- proached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before turning around.

MAINTENANCE

1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the en- gine before performing any main- tenance or checking procedures.

WARNING

The metallic parts reach high tem- peratures immediately after stop- ping the engine.

3. When replacing the cutting at- tachment or any other part, or when replacing the oil or any lu- bricant, always be sure to use only KOMATSU ZENOAH prod-

ucts or products which have been certified by KOMATSU ZENOAH for use with the KOMATSU ZENOAH product.

4. In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest KOMATSU ZENOAH authorized servicing dealer for assistance.

5. Do not use any accessory or at- tachment other than those bear- ing the KOMATSU ZENOAH mark and recommended for the unit.

6. Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product be- coming damaged during opera- tion or the product becoming un-

HANDLING FUEL

1. The engine of the KOMATSU ZENOAH product is designed to run on a mixed fuel, which con- tains highly flammable gasoline. Never store cans of fuel or refill the tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, weld- ing sparks, or any other source of heat or fire which might ignite the fuel.

2.Never smoke while operating the unit or refilling its fuel tank.

3. When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames any- where nearby before refueling.

4.Wipe spilled fuel completely us- ing a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 3 m or more away from where it was refueled before turning on the en- gine.

TRANSPORTATION

1. When hand-carrying the product, cover over the cutting part if nec- essary, lift up the product and carry it paying attention to the blade.

2.Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank dur- ing transport.

GB-8

able to operate properly.

TR2002 specifications

The Zenoah TR2002 is a powerful and versatile two-stroke engine that has garnered attention within the realm of professional outdoor power equipment. Designed primarily for use in handheld tools, such as brush cutters and trimmers, this engine exemplifies a perfect blend of efficiency, performance, and user-friendliness.

One of the standout features of the Zenoah TR2002 is its lightweight design, which significantly enhances maneuverability during operation. Weighing considerably less than many competing models, the TR2002 allows users to work for extended periods without the frustrating fatigue that can be common with heavier equipment. This aspect is particularly appealing to both amateur gardeners and professional landscape contractors alike.

In terms of technology, the Zenoah TR2002 incorporates advanced two-stroke technology to deliver robust power output while maintaining impressive fuel efficiency. This engine is designed to minimize emissions, making it compliant with stringent environmental regulations. The TR2002 employs a unique scavenging system that ensures optimal fuel-air mixture, which translates to improved performance and reduced operational noise.

The durability of the Zenoah TR2002 cannot be overlooked. Constructed with high-quality materials, this engine is built to withstand the rigors of continuous fieldwork. Its robust design is complemented by an efficient cooling system that prevents overheating, which can be a common issue in high-performance engines.

Another defining characteristic of the Zenoah TR2002 is its user-friendly operation. The engine features easy starting technology, which minimizes the effort needed to kickstart the unit. Additionally, the ergonomic handle design enhances user comfort, enabling better control during use. This aspect is essential for achieving precision in landscaping tasks, where maneuverability and control are paramount.

Maintenance is also simplified with the Zenoah TR2002. It is designed for easy access to the air filter and spark plug, allowing for quick and efficient servicing. This design consideration significantly reduces downtime and keeps the machine running smoothly.

In conclusion, the Zenoah TR2002 stands out as a well-rounded engine option for those in need of a reliable and efficient power source for their outdoor tools. Its combination of lightweight design, advanced technologies, durability, and user-friendly features make it a valuable asset for both professional landscapers and gardening enthusiasts. Whether tackling tough brush or fine trimming, the TR2002 delivers the performance needed to get the job done efficiently.