BCZ3000DL / BCZ3000DW
2. Specification
BCZ3000DL / BCZ3000DW |
|
Overall size (L W H) | 1860 x 395 x 325 / 1860 x 610 x 520 mm |
Dry weight | 5.7 / 7.1 kg |
Engine |
|
Model | Zenoah GZ30N |
Displacement | 29.5 cm3 |
Fuel | Mixture (Gasoline 50 : Oil 1) |
Carburetor | Diaphragm type |
Ignition system | Transistor controlled flywheel magneto |
Spark plug | CHAMPION RZ7C |
Fuel tank capacity | 0.72 L |
Starter | Recoil starter |
Clutch | Centrifugal type |
Reduction ratio | 1.357 |
Cutting head rotating direction |
Specifications are subject to change without notice.
3.Warning labels on the machine
Read owner’s manual before operat- ing this machine.
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled brushcutter or if you don’t observe the proper usage written in the manual.
4.Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER