Set up
F1
F2
F3
F4
F5
F6
■ENGINE
• Using attached 4 socket screws, secure the connection firmly with equal force. (F1)
■INSTALLING HANDLE
1.Loosen the 4 bolts on the handle bracket. (F2)
2.Insert the right handle (throttle lever is attached) and the left handle assembly into the bracket and retighten the bolts securely. (F2)
(1) Handle bracket (2) Right handle (3) Bolt | (4) Left handle (5) Engine side |
3.Remove the screw
■PROTECTOR
•Wrap the protector around the outer pipe as shown in the figure (F4), and fasten the hooks.
■SAFETY GUARD
•Attach the safety guard to the gear case and fix it with the clamp and 2 bolts (M5 x 25) securely. (F5)
(1) Bolt (2) Clamp (3) Main pipe (4) Safety guard
■BLADE
1.Put the angled bar
2.Remove the blade bolt
3.Put the blade onto the inner holder.
4.Put the outer holder onto the gearshaft making the recessed side face the blade.
5.Fasten the blade by the blade bolt with the washers
•Detailed attachments and set up method will be shown in separate Thai language manual.
3