Panasonic DX-800 appendix 185, Setting Up Your Machine for Relayed Transmission

Relayed Transmission

Setting Up Your Machine for Relayed Transmission

Programming the End Receiving Station into your Auto Dialer

If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay Address (ABBR No.) by the following procedure.

To set a One-Touch/ABBR for Relayed Transmission Request

1	7	2
2	1
	Ex:
3	Press a One-Touch key (01 - 28).
	Ex:

1:ONE-TOUCH 2:ABBR NO.

ONE-TOUCH< >

PRESS ONE-TOUCH

<01>

ENTER EMAIL ADDRESS

4	To change the input mode (between "ENTER EMAIL
		<01>
	ADDRESS" and "ENTER TEL. NO."),		ENTER TEL. NO.

EMAIL

5

6

7

8

press .

Enter the telephone number (up to 36 digits).

If the Relay and the End Receiving Stations are both in the same area, omit the Country Code and the Area Code from the End Receiving Station. The End Receiving Station is a local telephone number as viewed from the Relay Station.

Enter the station name by using the character keys (up to 15 characters).

Ex: R O M E

<01> 3961111234❚

<01>ENTER NAME 3961111234

<01> ROME❚ 3961111234

<01> RELAY ADDRESS

❚❚❚

Network Features

Continued on the next page...

185