Panasonic DX-800 appendix 108, Manual Number Dialing

Sending Documents via Telephone Line Memory Transmission

Manual Number Dialing

To dial the telephone number manually, follow the steps below.

1

2				Set document(s) face down.
	Enter a telephone number from the keypad.
	(Up to 36 digits)
	You can also designate more that one destination.
	Ex:	5	5	5	1	2	3	4

3

The document is stored into memory with a file number. Then starts dialing the telephone number immediately after storing the first page. (See Note 3)

The remaining page(s) continue to store into memory.

ENTER STATION(S) THEN PRESS START 00%

TEL. NO. 5551234❚

* STORE * NO.002

PAGES=001 05%

*DIALING * NO.002 5551234

NOTE

1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a pause (represented by a "-") before dialing the full number.

Ex: 9 PAUSE 5551234

2.If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,

press (represented by a "/").

The dialing mode will be changed from Pulse to Tone after dialing the digit "/".

Ex: 9 PAUSE * 5551234

3.This feature is called “Quick Memory Transmission”. If you wish to store all the document(s) into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY XMT) to “Invalid”. (See page 82)

108