Panasonic DX-800 appendix 171, Receive To Memory, Printing Out Documents

Receive To Memory

Printing Out Documents

After receiving a document with the Receive To Memory feature, the following message will appear on the display.

MESSAGE IN MEMORY < RCV TO MEMORY >

To print the document, follow the steps below.

1

2

3

4

5

6

8

5

3

Enter the password to print the documents. (See Note 1)

Ex: 1 2 3 4

SELECT MODE (1-9)

ENTER NO. OR ∨ ∧

RCV TO MEMORY=ON 1:OFF 2:ON 3:PRINT

RCV TO MEMORY=PRINT 1:OFF 2:ON 3:PRINT

INPUT PASSWORD

❚❚❚❚

INPUT PASSWORD

1234

* PRINTING *

MEMORY RCV’D DOC

Advanced Features

Machine will start to print the documents.

NOTE	1.	If the password has not been set, your machine will not prompt you to enter the password.
	2.	The documents will be printed immediately after pressing		in Step 4.
			SET

3.Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 37 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to “Off” first. Then change the password. (See page 170)

171