Panasonic DX-800 appendix Receive Mode TEL

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting	Comments
		Number
017	RECEIVE MODE	1	TEL	Setting the receive mode.
		*2	FAX
		3	FAX/TEL
			SW.
		4	TAM/FAX
018	OPERATOR CALL	*1	20 sec.	Selecting the length of time that your machine signals
	TIMER			(Rings) for an incoming voice call in Fax/Tel Auto
		2	30 sec.
				Switching mode. (See page 130)
		3	40 sec.
		4	50 sec.
019	OGM LENGTH	1	1 sec.	Setting for the OGM length of your TAM from 1 to 60
	(TAM I/F)			seconds. The machine will not start to detect SILENCE
		---	---
				until the time setting has lapsed.
				(Default = 20 sec.)
		60	60 sec.
020	SILENT DETECTION	1	Invalid	Selecting the Silent Detection Mode.
	(TAM I/F)
		*2	Valid
022	SUBSTITUTE RCV	1	Invalid	Selecting whether the machine receives to memory when
				recording paper runs out, toner runs out or recording paper
		*2	Valid
				is jammed.
023	RECORDING PAPER	1	A4	Setting the recording paper size installed in your machine.
	SIZE
		*2	Letter
		3	Legal
024	PRINT REDUCTION	1	Fixed	Selecting print reduction mode.
				Fixed : Reduce received document according to setting of
		*2	Auto
				Parameter No. 25.
				Auto : Reduce received document according to the length
				of received documents.
025	REDUCTION RATIO	70	70%	Selecting fixed print reduction ratio from 70% to 100%.
				This parameter functions only when fixed print reduction is
		----	----
				selected on Fax Parameter No. 24.
		*100	100%
026	POLLING PASSWORD		(----)	Setting a 4-digit password for secured polling.
027	POLLED FILE SAVE	*1	Invalid	Selecting whether the machine retains the polled
				document in memory even after the document is polled
		2	Valid
				once.
028	STAMP AT MEM. XMT	1	Invalid	Selecting whether the machine stamps the original
				documents when storing the documents into memory.
		*2	Valid
				(Depending on the Stamp setting on the Control Panel)
031	INCOMPLETE FILE	*1	Invalid	Selecting whether the machine retains the document in
	SAVE			memory if the document is not successfully transmitted.
		2	Valid

80