Sending Documents via Telephone Line

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialing (Direct Transmission)

To dial the telephone number manually, follow the steps below.

1

2

3

4

5

Set document(s) face down.

8 9

1

Enter a telephone number from the keypad.

Ex:

5

5

5

1

2

3

4

Your machine starts to dial the telephone number.

ENTER STATION(S) THEN PRESS START 00%

MEMORY XMT=ON 1:OFF 2:ON

ENTER STATION

00%

PRESS START TO DIAL 5551234

* DIALING * 5551234

NOTE

1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a pause (represented by a "-") before dialing the full number.

Ex: 9 PAUSE 5551234

2.If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,

press (represented by a "/").

The dialing mode will be changed from Pulse to Tone after dialing the digit "/".

Ex: 9 PAUSE * 5551234

3. To stop the transmission, press STOP . The display shows:

COMMUNICATION STOP ? 1:YES 2:NO

Press 1 to stop the transmission. The Communication Journal will not print out regardless of the printout mode setting of the Communication Journal.

112

Page 112
Image 112
Panasonic DX-800 appendix 112, Manual Number Dialing Direct Transmission, Press Start to Dial