Panasonic DX-800 appendix 156, Inbound Routing, Setting the Routing Parameters

Inbound Routing

Setting the Routing Parameters

Your machine can route documents received from a G3 fax machine to email address(s) or to Internet Fax machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s) over the telephone line.

To use this feature, the Fax Parameter No. 152 "SUB-ADDRESS ROUTING" and/or No. 153 "TSI ROUTING" must be set to "2:Valid".

No. 152 SUB-ADDRESS ROUTING: Set this parameter to perform an ITU-T sub-address query within its auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone number(s).

No. 153 TSI ROUTING: Set this parameter to perform a Numeric ID (TSI frame information) query within its auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone number(s).

No. 154 ROUTING HEADER FORMAT: Use this parameter to select the type of email header to be included in the "From" field of each routed faxes. (Default setting is "1:Originator")

Originator : The originating fax machine’s TSI will appear in the "From" field of the routed email.

Relay Station : The routing station’s email address will appear in the "From" field of the routed email.

No. 155 PRINT ROUTED DOCUMENT: Set this parameter to select whether a received fax to be routed is always printed on your machine or only when the routing operation fails.

To set the above Inbound Routing parameters, follow the steps below.

1

2

3

4

5

7

4

1 5 2

1for “INVALID”

or

2for “VALID”

SET MODE (1-8)

ENTER NO. OR ∨ ∧

FAX PARAMETER(1-182)

NO.=❚

152 SUB-ADDR ROUTING 1:INVALID

152 SUB-ADDR ROUTING 1:INVALID

152 SUB-ADDR ROUTING 2:VALID

153 TSI ROUTING 1:INVALID

156