Panasonic DX-800 appendix Multi-Station Transmission Broadcasting, Stns are SET ADD More or Start

Sending Documents via LAN

Multi-Station Transmission (Broadcasting)

You can store the document(s) into memory and then send to multiple stations (up to 202 addresses) via LAN.

1

2

Set document(s) face down.

Enter the email addresses by any combination of the following methods:

•One-Touch Dialing

•Abbreviated Dialing

•Directory Search Dialing (Auto Dialer and the LDAP),

press SET after each email address is entered.

ENTER STATION(S) THEN PRESS START 00%

• Manual Number Dialing, press SET after each station is entered (up to 70 addresses).

Ex:

Ex:

1 0 0

If you want to confirm the number of stations you have

<01>(Station name) abc@panasonic.com❚

[100](Station name) xyz@panasonic.com❚

2 STN(S) ARE SET ADD MORE OR START

Basic Operations

entered, press SET .

3

The document(s) is stored into memory with a file number. Then connects to the LAN and starts sending the email message.

* STORE * NO.001

PAGES=001 01%

*STORE * COMPLETED TOTAL PAGE=005 25%

ON LINE * MEM.MXT * ID:abc@panasonic.com

NOTE	1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialer is Full
	(more than 70 full email addresses are entered or 70 transmission reservations including G3
	communication have been already reserved).

2.If the transmission cannot be completed for any reason, the email may be returned undelivered; otherwise no reply will be printed.

3.The unit will accept a combination of email addresses and PSTN dialing numbers.

4.Generally, LAN transmission to multiple destinations will be completed in a single transmission to the SMTP server. However, when the “DELIVERY NOTICE=ON” or when using the DIRECT IFAX XMT modes, separate transmission is required for each destination.

97