Panasonic DX-800 appendix Energy Saver

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
032	COPY REDUCTION	1	Manual	Selecting whether the machine performs the copy
				reduction ratio automatically or manually.
		*2	Auto
				Manual : The machine will prompt you for the Zoom ratio
					(100% to 70%) when making copies.
				Auto : The machine will automatically determine the
					reduction ratio according to the length of the
					original document.
034	ENERGY SAVER	1	Off	To reduce the power consumption in standby, select either
	MODE			Energy-Saver or Sleep mode and specify the Delay Time
		*2	Energy-
				(1 to 120 minutes) for the machine to enter into the
			Saver	selected mode.
				The Delay Timer setting is only available in the Energy-
				Saver or Sleep Modes.
				Off	: The unit will remain in standby
					mode and consume more energy
					than when in Energy-Saver or
					Sleep modes.
				Energy-Saver Mode : Saves energy by consuming less
					power than when in standby mode
					by turning off the fuser unit after
					the specified time.
035	DAYLIGHT TIME	1	Invalid	Selecting whether the clock adjusts for Daylight Saving
				Time automatically. The built-in clock will advance 1 hour
		*2	Valid
				at 2:00 am on the first Sunday in April and fallback 1 hour
				at 2:00 am on the last Sunday in October.
036	RING PATTERN	*1	Invalid	All ring patterns.
	DETECT (DRD)
		2	Valid	Select a ring pattern for automatic answering.
	(See Note 2)
				1: A	Standard ring pattern.
				2: B	Double ring pattern.
				3: C	Triple ring pattern (Short-Short-Long).
				4: D	All other triple ring patterns, except the
					type C described above.
037	RCV TO MEMORY		(----)	Enter a 4-digit password used to print out the received
				document in memory by using F8-5 (RCV TO MEMORY).
				When F8-5 is set to On, this parameter will not be shown
				on the LCD display. (See page 170)
038	ACCESS CODE		(----)	Enter a 4-digit Access Code to secure the machine from
				unauthorized use. (See page 168)
039	PIN CODE ACCESS	*1	None	Selecting the access method (Prefix or Suffix) to dial a
				number with PIN Code. (See page 175)
		2	Suffix
		3	Prefix
042	CONF. POLLED FILE	*1	Invalid	Selecting whether the machine saves the confidential
	SAVE			polled file even after the file is polled once.
		2	Valid
043	PASSWORD-XMT	*1	Off	Setting a 4-digit XMT-Password and selecting whether the
				machine performs and checks the XMT-Password of the
		2	On
				receiving station when transmitting. (See page 196)

Continued on the next page...

Programming Your Machine

81