Panasonic DX-800 Using Email to Program or Retrieve Parameters, Subject Line Command Function

Programming or Retrieving Parameters via Email

Using Email to Program or Retrieve Parameters

This feature is a powerful tool, which provides a convenient and easy way of retrieving or programming Internet Parameters, One-Touch, ABBR Dialing Numbers, Program keys and Journal retrieval from your PC by sending a text email message to your machine.

Using your email application’s "Subject:" line as a command-input field, you can request your machine to perform the following commands:

		"Subject:" Line Command	Function
	1	#set parameters(password)#	Programs the Internet Parameters
	2	#get parameters(password)#	Retrieves the Internet Parameters
	3	#set abbr(password)#	Programs the Auto Dialer
	4	#get abbr(password)#	Retrieves the Auto Dialer Data
	5	#get jnl(password)#	Retrieves the current Journal data
Where:		"set" is used to program the data
		"get" is used to retrieve the data

"parameters" represents Internet Parameters "abbr" represents Auto Dialer

"jnl" represents Journal

"password" is the Remote Password programmed in your machine's User Parameters (i.e. 123456789). Must be enclosed within the parenthesis "( )".

The command must be enclosed within the hash (#) signs.

Using a PC to Input the Internet Parameters Remotely

This feature provides a convenient and an easy way to input the Internet Parameters right from your PC by sending a text email message to your machine.

The following parameters can be input remotely via a PC. The other parameters must be entered from the machine in the User Parameters. (See page 48)

•Sender Selection (up to 24 User Names, see page 150)

•Default Domain

•Selectable Domains (up to 10 additional Domain Names)

•Remote Password

•Manager’s Email Address

•Relay XMT Password

•Relay Domain (up to 10 Domain Names authorized for Relay XMT Request)

•LDAP Server Name

•LDAP Login Name

•LDAP Password

•LDAP Search Base

•Community Name (up to 2 Community Names)

•Device Name

•Device Location

Your machine interprets the command that you enter in the "Subject" line of your email message and performs one of the following functions, it Retrieves or Stores data into the Internet Parameters (User Parameters).

The two types of commands that can be entered in the "Subject" line of your email:

1)	To Store	:	#set parameters(password)# : where the "password" is the Remote Password programmed in
	data, type		your machine's User Parameters (i.e. 123456789).
			You can enter the Internet Parameters shown above with this
			command the first time. However, if these fields already contain
			data, do not use this command as the existing information will
			be deleted and overwritten. Use the Retrieve command below
2)	To Retrieve	:	instead, refer to pages 54 to 55.
			#get parameters(123456789)#

data, type

NOTE	1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
	(See page 84)

Installing Your Machine

51