Zenoah G5200 manual

Page 1

848C8C93A1 (506)

CHAIN SAW

G5200

NOTE :

1.Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement.

2.KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the use of any parts other than those specified by the company.

3.When placing orders of parts for repair and/or replacement, check if the model name and the serial number are suitable to those specified in the parts list, then use parts number described in the parts list.

4.The contents described in the parts list may change due to improvement.

5.The parts for the machine shall be supplied within ten (10) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of ten (10) years after the machine is discontinued. And it is also possible that some parts may be available even after the limit of ten (10) years.]

APPLICABLE SERIAL NUMBERS : 303107 and up

June 2005

Image 1
Contents G5200 Power Unit Crankcase assy 3356-21130 Spring Pin IGNITION, Starting Knob Handle Spring pin ø5.2x24 Fueling Systems Fuel pipe assy OIL SYSTEM, Clutch Oil pump assy Carburetor 2880-81001 Carburetor assy Breaking Systems Label, Chain cover Guide BAR, SAW CHAIN, Tools 2974-52111 Hard nose bar Minamidai, Kawagoe, Saitama, 350-1192 Japan