Zenoah BC2310DL owner manual Spark Plug, Replacement Plug is a NGK BPMR7A, Muffler, Gear Case

Page 14

BC2310DL

9. Maintenance

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

ZENOAH.

0.6~0.7 mm

•REPLACEMENT PLUG IS A NGK BPMR7A.

IMPORTANT

•Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

150 ~ 220 kgf-cm TIGHTENING TORQUE: (14.7 ~ 21.6 N.m.)

MUFFLER

WARNING

•Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leak- age is found, stop using the machine and have it re- paired immediately.

•Note that failing to do so may result in the engine catching on fire.

GEAR CASE

•The reduction gears are lubricated by multipurpose, lithium-based grease in the gear case. Supply new grease every 25 hours of use or more often depend- ing on the job condition.

•Remove the bolt opposit to the grease nipple before installing new grease to arrange for old grease to exit.

INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muf- fler to become overheated and that in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note that it is necessary to remove the engine cover shown in (MA5) in order to be able to view the up- per part of the cylinder.

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter.

(1) Intake air cooling vent

GB-14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BC2310DL Wear head, eye and ear protection E13*97/68SH2G3*2002/88*0104*04Contents Specification Parts locationWe won’t warrant the machine, if you use Symbols on the machineNever modify your machine Proper usage written in the manualWorking Circumstance For safe operationWorking Condition Working PlanStarting the Engine Using the ProductBefore Starting Engine Handling Fuel MaintenanceIf Someone Comes TransportationInstalling Cutting Attachment Guard Set upInstalling Handle Installing Cutting HeadFuel Stopping Engine OperationStarting Engine Adjusting the Line Length Adjusting Throttle CableAdjusting Idling Speed Cutting Work Line Head UsageFuel Filter MaintenanceAIR Filter Muffler Replacement Plug is a NGK BPMR7ASpark Plug Gear CaseStorage Procedures to be Performed After Every 100 Hours of USEFor safety reasons, do not use metal reinforced line DisposalCheck Probable Causes Action Troubleshooting guideLimited warranty

BC2310DL specifications

The Zenoah BC2310DL is a powerful, lightweight brush cutter designed for professionals and serious garden enthusiasts. Renowned for its durability and efficiency, this model stands out in the competitive market of outdoor power equipment. Equipped with advanced features, the BC2310DL is optimized for a variety of cutting tasks, making it an ideal choice for landscaping, gardening, and general outdoor maintenance.

One of the standout characteristics of the BC2310DL is its robust engine. The brush cutter is powered by a 22.5cc two-stroke engine, delivering high performance while maintaining fuel efficiency. This engine design minimizes exhaust emissions, aligning with modern environmental standards while ensuring that the tool remains user-friendly. The lightweight construction of the BC2310DL — weighing in at just around 4.9 kg — facilitates easy maneuverability, allowing users to work for extended periods without excessive fatigue.

The ergonomic design of the Zenoah BC2310DL is also noteworthy. It features a well-balanced body with strategically placed handlebars that reduce vibration and enhance control. This makes it particularly effective for intricate tasks, such as trimming around trees and flower beds. The adjustable handle further allows users to customize the grip to suit their personal comfort levels and working styles.

In terms of technology, the BC2310DL incorporates a high-performance cutting head that can accommodate various types of cutting attachments. Users can easily switch between line trimmers and brush blades, providing versatility for tackling different types of foliage and terrain. The cutting width of the machine is ample, allowing for efficient trimming without needing excess passes.

Safety features are paramount in the BC2310DL's design. It is equipped with a protective shield that safeguards the user from flying debris while cutting. Additionally, the quick-start system ensures easy ignition with minimal effort, reducing the risk of strain on the user.

Overall, the Zenoah BC2310DL represents a blend of power, efficiency, and user-friendly design. Its combination of an advanced engine, lightweight composition, ergonomic features, and versatile cutting options make it an exceptional choice for anyone looking to maintain their outdoor spaces with optimal performance and minimal effort. Whether it's tackling overgrowth or maintaining a manicured edge, the BC2310DL proves to be a reliable partner in outdoor maintenance tasks.
Top Page Image Contents