Zenoah BC251 owner manual Parts location, Contents

Page 3

BC251

SAFETY FIRST

Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions, which must be followed in or- der to prevent accidents, which could lead to serious bodily in- jury or death.

IMPORTANT

This mark indicates instructions, which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

Contents

 

 

1.

Parts location

3

 

2.

Specifications

4

G

3.

Warning labels on the machine

4

B

4.

Symbols on the machine

4

 

5.

For safe operation

5

 

6.

Set up

8

 

7.

Fuel

9

 

8.

Operation

10

 

9.

Maintenance

13

 

10.

Storage

15

 

11.

Disposal

15

 

12.

Troubleshooting guide

16

 

1. Parts location

(1)

Primer

 

 

 

 

(2)

Air cleaner cover

 

 

 

 

(3)

Choke lever

2

 

 

13

(4)

Fuel tank

 

 

 

 

 

 

(5)

Starter knob

1

 

11

14

(6)

Line head

 

 

 

9

(7)

Gear case

 

 

 

12

(8)

Cutting attachment guard

 

 

 

3

4

5

 

(9)

Loop handle

 

 

 

 

(10)Shaft tube

(11)Spark arrester

(12)Throttle trigger

(13)

Stop switch

 

(14)

Throttle cable

10

7

6

8

GB-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents BC251 Declaration of Comformity Wear head, eye and ear protectionBC251 e13*97/68SH2G3*2002/88*0194*00 Parts location ContentsNever modify your machine SpecificationSymbols on the machine Model BC251Working Plan For safe operationWorking Condition Working CircumstanceUsing the Product Before Starting EngineStarting the Engine Transportation MaintenanceIf Someone Comes Handling FuelInstalling Cutting Head Set upInstalling Handle Installing Cutting Attachment GuardFuel Cutting head will start rotating upon the en- gine starts StopStart Ignition switchOperation Starting EngineAdjusting Idling Speed Adjusting the Line Length Cutting Work Line Head UsageTrimming Grass and Weeds Maintenance For safety reasons, do not use metalreinforced lineRefilling Trimming Line Muffler Replacement Plug is a NGK BPMR7AAIR Filter Fuel FilterGear Case Procedures to be Performed After Every 100 Hours of USEStorage DisposalTroubleshooting guide Limited warrantyCheck Probable Causes Action

BC251 specifications

The Zenoah BC251 is a highly regarded brushcutter that emphasizes efficiency and performance for both professionals and hobbyists in landscaping and gardening. This powerful machine is designed for tackling tough grass, weeds, and brush with ease, making it an essential tool for maintaining expansive lawns and gardens.

One of the standout features of the BC251 is its lightweight design, weighing in at approximately 5.5 kg (12 lbs). This makes it easy to maneuver, reducing fatigue during extended use. The ergonomic handle is also adjustable, allowing users to find the most comfortable position while operating the machine. These design choices enhance user comfort and control, especially during long periods of operation.

The engine in the Zenoah BC251 is a robust 25.4 cc, air-cooled, two-stroke engine that delivers impressive power and performance. This engine not only ensures efficient cutting but also contributes to lower emissions through its environmentally friendly design. The BC251 employs Zenoah's advanced engine technology, which improves fuel efficiency without compromising on performance. Users benefit from longer operating times and reduced fuel costs, which is a crucial consideration for professional landscapers.

Another notable characteristic of the BC251 is its versatility. It comes with a range of attachments and cutting heads, making it suitable for various tasks. Whether trimming grass along sidewalks or clearing more substantial vegetation, the BC251 can be adapted for different cutting needs. The quick-change head allows for easy switching between attachments without the need for tools, significantly improving productivity.

The vibration-dampening technology integrated into the BC251 also enhances user experience by reducing the amount of vibration transferred to the operator's hands. This feature is especially important for those who use the brushcutter for extended periods, as it minimizes fatigue and discomfort.

In summary, the Zenoah BC251 is an outstanding brushcutter known for its powerful engine, lightweight design, and versatility. With its user-friendly features and advanced technologies, it is an ideal choice for those seeking a reliable tool for maintaining gardens and landscapes. The combination of performance, comfort, and adaptability makes the BC251 a valuable addition to any landscaping toolkit.
Top Page Image Contents