Zenoah BC251 owner manual Before Starting Engine, Starting the Engine, Using the Product

Page 6

BC251

5. For safe operation

BEFORE STARTING

THE ENGINE

1. The area within a perimeter of

15 m (50 ft) of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be performed simulta- neously by two or more persons, care should also be taken to con- stantly look around or otherwise check for the presence and loca- tions of other people working so as to maintain a distance between each person sufficient to ensure safety.

2.Check the condition of working area to avoid any accident by hit- ting hidden obstacles such as stumps, stones, cans, or broken glass.

IMPORTANT

Remove any obstacle before begin- ning work.

3. Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment is properly installed and securely fastened.

4. Be sure to attach the cutting at- tachment guard securely in place, or you may get serious in- jury.

5.Always use the shoulder strap. Adjust the strap for comfort be- fore starting the engine. The strap should be adjusted so the left hand can comfortably hold the handlebar grip approximately waist high.

STARTING THE ENGINE

1. Keep bystanders and animals at least 15 m (50 ft) away from the operating point. If you are ap- proached, immediately stop the engine.

2.The product is equipped with a centrifugal clutch mechanism, so

onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.

WARNING

Never place the throttle into the high-speed position when starting the engine.

3.After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized ZENOAH servic- ing dealer for repair.

USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the

level necessary.

4. If the unit starts to shake or vi- brate, turn off the engine and check the whole unit. Do not use it until the trouble has been prop- erly corrected.

5. Keep all parts of your body away

from rotating cutting attachment

GB-6

the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product

and hot surfaces.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents BC251 Declaration of Comformity Wear head, eye and ear protectionBC251 e13*97/68SH2G3*2002/88*0194*00 Contents Parts locationModel BC251 SpecificationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanUsing the Product Before Starting EngineStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationInstalling Cutting Attachment Guard Set upInstalling Handle Installing Cutting HeadFuel Starting Engine StopStart Ignition switchOperation Cutting head will start rotating upon the en- gine startsAdjusting Idling Speed Adjusting the Line Length Cutting Work Line Head UsageTrimming Grass and Weeds Maintenance For safety reasons, do not use metalreinforced lineRefilling Trimming Line Fuel Filter Replacement Plug is a NGK BPMR7AAIR Filter MufflerDisposal Procedures to be Performed After Every 100 Hours of USEStorage Gear CaseTroubleshooting guide Limited warrantyCheck Probable Causes Action

BC251 specifications

The Zenoah BC251 is a highly regarded brushcutter that emphasizes efficiency and performance for both professionals and hobbyists in landscaping and gardening. This powerful machine is designed for tackling tough grass, weeds, and brush with ease, making it an essential tool for maintaining expansive lawns and gardens.

One of the standout features of the BC251 is its lightweight design, weighing in at approximately 5.5 kg (12 lbs). This makes it easy to maneuver, reducing fatigue during extended use. The ergonomic handle is also adjustable, allowing users to find the most comfortable position while operating the machine. These design choices enhance user comfort and control, especially during long periods of operation.

The engine in the Zenoah BC251 is a robust 25.4 cc, air-cooled, two-stroke engine that delivers impressive power and performance. This engine not only ensures efficient cutting but also contributes to lower emissions through its environmentally friendly design. The BC251 employs Zenoah's advanced engine technology, which improves fuel efficiency without compromising on performance. Users benefit from longer operating times and reduced fuel costs, which is a crucial consideration for professional landscapers.

Another notable characteristic of the BC251 is its versatility. It comes with a range of attachments and cutting heads, making it suitable for various tasks. Whether trimming grass along sidewalks or clearing more substantial vegetation, the BC251 can be adapted for different cutting needs. The quick-change head allows for easy switching between attachments without the need for tools, significantly improving productivity.

The vibration-dampening technology integrated into the BC251 also enhances user experience by reducing the amount of vibration transferred to the operator's hands. This feature is especially important for those who use the brushcutter for extended periods, as it minimizes fatigue and discomfort.

In summary, the Zenoah BC251 is an outstanding brushcutter known for its powerful engine, lightweight design, and versatility. With its user-friendly features and advanced technologies, it is an ideal choice for those seeking a reliable tool for maintaining gardens and landscapes. The combination of performance, comfort, and adaptability makes the BC251 a valuable addition to any landscaping toolkit.
Top Page Image Contents