Zenoah G5300 manual Starting and Stopping, Starting and stopping, Cold engine, Warm engine

Page 18

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before

!starting:

The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving chain during starting.

Never start a chain saw unless the bar, chain and all covers are fitted correctly. Otherwise the clutch can come loose and cause personal injuries.

Place the machine on firm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Cold engine

Starting: The chain brake must be engaged when the chain saw is started. Activate the brake by moving the front hand guard forwards.

Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position.

Start throttle: The correct choke/start throttle setting is obtained by moving the control to the choke position.

Air purge: If the machine is fitted with an air purge (A): Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Decompression valve: If the machine is fitted with a

decompression valve (B): Press the valve to reduce the pressure in the cylinder and make starting easier.You should always use the decompression valve when starting the machine. Once the machine has started the valve will automatically return to its original setting.

A B

Warm engine

Use the same procedure as for starting a cold engine but without setting the choke control in the choke position. The correct choke/start throttle setting is obtained by moving the choke control to the choke position and then pushing it in again.

Starting

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly. Never twist the starter cord around your

hand.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Push in the choke control as soon as the engine fires and keep pulling until the engine starts. When the engine starts, quickly apply full throttle; the throttle start lock will automatically disengage.

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s manual KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents What is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Injuries Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Filling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting a spike bumper AssemblyFitting the bar and chain Protect your hands from injuryFuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLimbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatDirectional cuts Felling cutFreeing a tree that has fallen badly Freeing a trapped treeGeneral advice How to avoid kickbackWhat is kickback? Cutting trees and branches that are in tensionCutting the trunk into logs Maintenance Carburettor adjustmentGeneral Checking brake band wear Correctly adjusted carburettorHigh speed jet H Checking the front hand guardChecking the inertia brake release ImmediatelyMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springLubricating the bar tip sprocket Air filterSpark plug Needle bearing lubricationTemperature 0C or colder Adjustment of the oil pumpDust Free centrifugal cleaning Cooling systemMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataApplies to Europe only Bar and chain combinationsSaw chain filing and file gauges EC-declaration of conformity EN ISO 12100-22003, Cispr 122005, EN ISOLimited Warranty Limited warranty1151331-26

G5300 specifications

The Zenoah G5300 is a highly regarded two-stroke gasoline engine, well-known for its robust performance and reliability within the realm of outdoor power equipment. Its engineering reflects a commitment to innovation and efficiency, making it ideal for various applications such as brush cutters, chainsaws, and other handheld equipment.

One of the key features of the G5300 is its displacement, which typically measures around 53cc. This size strikes an excellent balance between power output and weight, enabling users to tackle demanding tasks without the burden of a heavy machine. The engine's design leverages a high power-to-weight ratio, resulting in enhanced maneuverability and ease of use, particularly in tight spaces.

The G5300 utilizes a sophisticated electronic ignition system. This technology ensures reliable starting, consistent performance, and reduced emissions. The engine also features a dual-ring piston, which improves compression efficiency and enhances overall power delivery. This design contributes to a smoother operation and helps extend the life of the engine.

Another notable characteristic of the Zenoah G5300 is its fuel efficiency. With advancements in combustion technology, the engine is designed to reduce fuel consumption while still providing ample power. This not only lowers operational costs for the user but also minimizes environmental impact, aligning with contemporary preferences for sustainable practices in outdoor equipment.

Durability is another hallmark of the G5300. Built with high-quality materials, the engine is designed to withstand the rigors of outdoor use. The components are rigorously tested to ensure they can handle extreme conditions, whether it's scorching heat or chilly weather. The engine's construction also includes vibration dampening features, enhancing user comfort during extended operations.

Serviceability is a consideration in the design of the G5300, with easily accessible components promoting straightforward maintenance. Users can quickly perform routine checks, tune-ups, and repairs, minimizing downtime and extending the lifespan of the equipment.

In summary, the Zenoah G5300 stands out in the outdoor power equipment market due to its powerful and efficient design. With a focus on durability, serviceability, and fuel efficiency, it meets the demands of both professional landscapers and hobbyist gardeners alike. Its blend of advanced technology and practical features makes it a reliable choice for anyone seeking a high-performance engine for their outdoor tasks.
Top Page Image Contents